Keeping Koi Keeping Simple
Free Shipping when you spend £60 or more.
Filter by categories
- View All
- Filtration and UV Clarifiers
- Water and Air Pumps
- Care and Treatment
- Pressure Pipe
- Waste Pipe
- Rubber Fittings
- Drains and Accessories
- Heating
- Technology
- Merchandise
Basket
Your basket is currently empty
- © 2024 Koi Chronicles. All rights reserved.
- Privacy Policy
OASE Proficlear Premium Compact-L EGC (Pumped)
£3999.00
£4120.00
OASE Proficlear Premium Compact-L EGC (Pumped)
Details
- Suitable for ponds up to 140.0 m³
- Conveniently control all settings via an app with the Easy Garden Control System (EGC); existing systems can be upgraded using the separately available upgrade kit
- Inexpensive alternative for smaller ponds, particularly koi ponds
TECHNICAL DATA
SPARE PARTS
Pos. | Product | Quantity | |
---|---|---|---|
1 | ASM cover PCP Compact-L | 1 | |
2 | Foamed rubber band drum filter 2018 | 1 | |
3 | Add. pack Hel-X 13 mm 20 l | 1 | |
4 | Oval head screw V2A DIN 7985 M6 x 16 | 1 | |
5 | Fiberplate DIN 7603 6 x 12 x 1 mm | 1 | |
6 | Mounting plate float switch PCP Gravi.II | 1 | |
7 | Lock nut V2A DIN 985 M6 | 1 | |
9 | Container PCP Compact-L gravity | 1 | |
10 | Oval head screw V2A DIN 7985 M6 x 25 | 1 | |
11 | Hexagon nut V2A DIN 934 M6 | 1 | |
12 | Cap nut V2A DIN 1587 M6 | 1 | |
13 | Spare set ASM gland seal | 1 | |
14 | Upgrade-Controller ProfiClear Prem. EGC | 1 | |
15 | Strap grip PA black | 1 | |
16 | Cable protection Quintet / drum filter | 1 | |
17 | ASM waste channel PCP DF-L 2017 | 1 | |
18 | Spare ASM drum motor | 1 | |
19 | Cylinder screw V2A DIN 912 6 x 12 | 1 | |
20 | Cover cleaning tube DF-L 2017 inject | 1 | |
21 | Spare cleaning tube bracket PCP 2017 | 1 | |
22 | Spare hose bracket ProfiClear Premium | 1 | |
23 | ASM cleaning tube DF-Compact-L | 1 | |
24 | ASM sieve frame 150 µm | 1 | |
24 | ASM sieve frame 60 µm | 1 | |
24 | ASM sieve frame PCP DF 30 µm | 1 | |
25 | Locking pin V2A DIN 11023 – 6 mm | 1 | |
26 | Drum shaft | 1 | |
27 | Spare drum ProfiClear Premium | 1 | |
28 | Spare drum bearing drum filter | 1 | |
29 | Spare seperating wall middle Comp.L grav | 1 | |
30 | Spare connection air stone Comp. L grav | 1 | |
31 | Add. pack air connector ProfiCl. Compact | 1 | |
32 | Spare gasket set sep. wall Compact L | 1 | |
34 | Cable tie 130 x 2.6 black | 1 | |
35 | Mesh tube bracket | 1 | |
36 | Screw V4A DIN 912 M6 x 10 | 1 | |
37 | Airstone clamp bio filter | 1 | |
38 | Air stone ProfiClear Premium Moving Bed | 1 | |
39 | ASM mesh tube Compact L Gravity | 1 | |
40 | Oval head screw H-V2A DIN 7985 M5 x 10 | 1 | |
41 | Perforated sheet ProfiCl. Compact middle | 1 | |
42 | Lock nut V2A DIN 985 M5 | 1 | |
43 | Oval head screw CZ-V2A DIN 7981 6.3 x 32 | 1 | |
44 | Gasket mesh tube 2016 | 1 | |
45 | Outlet 150/1 ProfiClear M 2 – M 5 | 1 | |
46 | ASM connection set DN 110 | 1 | |
47 | Blanking cap DN 110 | 1 | |
48 | Spare drain DN75 XL | 1 | |
49 | Spare srews set drain DN75 Premium | 1 | |
50 | Pre-filter rinse pump | 1 | |
51 | Rinse pump 6 bar – 6.35 m cable | 1 | |
52 | Washer VA DIN 9021 6.4 | 1 | |
53 | Fastening kit rinse pump | 1 | |
54 | Spare connector rinse pump Compact L | 1 | |
55 | Spare drum gasket | 1 | |
56 | Cylinder screw V2A DIN 912 M4 x 20 | 1 | |
57 | ASM signal box DF Gravity 2017 | 1 | |
58 | Safety nut V2A DIN 985 M4 | 1 | |
59 | ASM tube float switch gravity drum filt. | 1 | |
60 | Spare seperating wall front Comp.L grav. | 1 | |
61 | Spare plain roller drum filting | 1 | |
62 | Cable holder drum filter | 1 | |
63 | Cylinder screw V2A DIN 912 6 x 16 | 1 | |
64 | Spike | 1 |
OASE Proficlear Premium Compact-L EGC (Gravity)
£3999.00
£4120.00
OASE Proficlear Premium Compact-L EGC (Gravity)
Details
- Suitable for ponds up to 140.0 m³
- Conveniently control all settings via an app with the Easy Garden Control System (EGC); existing systems can be upgraded using the separately available upgrade kit
- Inexpensive alternative for smaller ponds, particularly koi ponds
TECHNICAL DATA
SPARE PARTS
Pos. | Product | Quantity | |
---|---|---|---|
1 | ASM cover PCP Compact-L | 1 | |
2 | Foamed rubber band drum filter 2018 | 1 | |
3 | Add. pack Hel-X 13 mm 20 l | 1 | |
4 | Oval head screw V2A DIN 7985 M6 x 16 | 1 | |
5 | Fiberplate DIN 7603 6 x 12 x 1 mm | 1 | |
6 | Mounting plate float switch PCP Gravi.II | 1 | |
7 | Lock nut V2A DIN 985 M6 | 1 | |
9 | Container PCP Compact-L gravity | 1 | |
10 | Oval head screw V2A DIN 7985 M6 x 25 | 1 | |
11 | Hexagon nut V2A DIN 934 M6 | 1 | |
12 | Cap nut V2A DIN 1587 M6 | 1 | |
13 | Spare set ASM gland seal | 1 | |
14 | Upgrade-Controller ProfiClear Prem. EGC | 1 | |
15 | Strap grip PA black | 1 | |
16 | Cable protection Quintet / drum filter | 1 | |
17 | ASM waste channel PCP DF-L 2017 | 1 | |
18 | Spare ASM drum motor | 1 | |
19 | Cylinder screw V2A DIN 912 6 x 12 | 1 | |
20 | Cover cleaning tube DF-L 2017 inject | 1 | |
21 | Spare cleaning tube bracket PCP 2017 | 1 | |
22 | Spare hose bracket ProfiClear Premium | 1 | |
23 | ASM cleaning tube DF-Compact-L | 1 | |
24 | ASM sieve frame 150 µm | 1 | |
24 | ASM sieve frame 60 µm | 1 | |
24 | ASM sieve frame PCP DF 30 µm | 1 | |
25 | Locking pin V2A DIN 11023 – 6 mm | 1 | |
26 | Drum shaft | 1 | |
27 | Spare drum ProfiClear Premium | 1 | |
28 | Spare drum bearing drum filter | 1 | |
29 | Spare seperating wall middle Comp.L grav | 1 | |
30 | Spare connection air stone Comp. L grav | 1 | |
31 | Add. pack air connector ProfiCl. Compact | 1 | |
32 | Spare gasket set sep. wall Compact L | 1 | |
34 | Cable tie 130 x 2.6 black | 1 | |
35 | Mesh tube bracket | 1 | |
36 | Screw V4A DIN 912 M6 x 10 | 1 | |
37 | Airstone clamp bio filter | 1 | |
38 | Air stone ProfiClear Premium Moving Bed | 1 | |
39 | ASM mesh tube Compact L Gravity | 1 | |
40 | Oval head screw H-V2A DIN 7985 M5 x 10 | 1 | |
41 | Perforated sheet ProfiCl. Compact middle | 1 | |
42 | Lock nut V2A DIN 985 M5 | 1 | |
43 | Oval head screw CZ-V2A DIN 7981 6.3 x 32 | 1 | |
44 | Gasket mesh tube 2016 | 1 | |
45 | Outlet 150/1 ProfiClear M 2 – M 5 | 1 | |
46 | ASM connection set DN 110 | 1 | |
47 | Blanking cap DN 110 | 1 | |
48 | Spare drain DN75 XL | 1 | |
49 | Spare srews set drain DN75 Premium | 1 | |
50 | Pre-filter rinse pump | 1 | |
51 | Rinse pump 6 bar – 6.35 m cable | 1 | |
52 | Washer VA DIN 9021 6.4 | 1 | |
53 | Fastening kit rinse pump | 1 | |
54 | Spare connector rinse pump Compact L | 1 | |
55 | Spare drum gasket | 1 | |
56 | Cylinder screw V2A DIN 912 M4 x 20 | 1 | |
57 | ASM signal box DF Gravity 2017 | 1 | |
58 | Safety nut V2A DIN 985 M4 | 1 | |
59 | ASM tube float switch gravity drum filt. | 1 | |
60 | Spare seperating wall front Comp.L grav. | 1 | |
61 | Spare plain roller drum filting | 1 | |
62 | Cable holder drum filter | 1 | |
63 | Cylinder screw V2A DIN 912 6 x 16 | 1 | |
64 | Spike | 1 |
OASE Proficlear Premium Compact-M (Pumped)
£2349.99
£2499.99
OASE Proficlear Premium Compact-M (Pumped)
The Oase Proficlear Premium Compact - M - Pump Fed Pond Filter is an advanced filter system combining the self cleaning technology and moving bed filtration principles of Oase Premium Modular Kits. Pond water enters the tank (normally via a Bitron UV which is sold separately) straight in to the centre of the drum and flows out through the fine mesh sieves 80µm (micrometres) in to the tank. Thanks to the drum technology, the debris which is trapped on the inside surface of the sieves is easily and automatically cleaned. An integrated water sensor measure when the drum needs cleaning and triggers the rotation of the drum and activates the water jets, which blast the mesh clean. The debris and water is collected and drains out of the tank to waste. This cleaning process is achieved using a powerful, high-quality pressure pump which is mounted in the base of the tank. The mesh sieves are very easy to remove (no tools required) and the free-wheeling function makes for easy access to the drum interior. Rakes on the inside of the drum help prevent the sieves from being choked by algae. Not only does the filter have a maximum flowrate but to ensure it works correctly it also has a minimum flow.
The second stage in the filtration process is biological filtration. In this area the water is released from the perforated retransfer tube into the moving bed part of the filter, which contains 40 Ltrs of specially designed "Hel-X 13" biomedia. The water in this area is continually "moving" due to the release of air at a rate of 2000 Lph from the integrated aerator (air pump not included). This design of moving media in water which is highly enriched with oxygen, is the ideal environment to ensure the highly efficient removal of toxins, ensuring perfect water conditions.
The Oase Proficlear Premium Compact - M - Pond Filter has a drain slide valve at the bottom of the tank which connects to Oase’s 75mm pipework. The filter is supplied with 2 year guarantee which can be upgraded to 3 years by registering with OASE. The filter has 5m of mains cable which connects to the weatherproof control box.
The Oase Proficlear Premium Compact - M - Pump Fed Pond Filter has a single 110mm (4") outlet pipe and 2 x 50mm inlet connections which are compatible with the Oase Bitron C72 - 110C Ultra Violet Lights.
NEW - EGC (Easy Garden Control) System
The OASE ProfiClear Premium Compact - M has been upgraded to include Oase's EGC (Easy Garden Control) System, which give you the ability to connect this filter to the InScenio FM Master WLAN ECG wireless control system
OASE Proficlear Premium Compact-M (Gravity)
£2349.99
£2499.99
OASE Proficlear Premium Compact-M (Gravity)
The Oase Proficlear Premium Compact - M - Gravity Fed Pond Filter is an advanced filter system combining the self cleaning technology and moving bed filtration principles of Oase Premium Modular Kits. Pond water enters the tank (normally via a Bitron UV which is sold separately) straight in to the centre of the drum and flows out through the fine mesh sieves 80µm (micrometres) in to the tank. Thanks to the drum technology, the debris which is trapped on the inside surface of the sieves is easily and automatically cleaned. An integrated water sensor measure when the drum needs cleaning and triggers the rotation of the drum and activates the water jets, which blast the mesh clean. The debris and water is collected and drains out of the tank to waste. This cleaning process is achieved using a powerful, high-quality pressure pump which is mounted in the base of the tank. The mesh sieves are very easy to remove (no tools required) and the free-wheeling function makes for easy access to the drum interior. Rakes on the inside of the drum help prevent the sieves from being choked by algae. Not only does the filter have a maximum flowrate but to ensure it works correctly it also has a minimum flow.
The second stage in the filtration process is biological filtration. In this area the water is released from the perforated retransfer tube into the moving bed part of the filter, which contains 40 Ltrs of specially designed "Hel-X 13" biomedia. The water in this area is continually "moving" due to the release of air at a rate of 2000 Lph from the integrated aerator (air pump not included). This design of moving media in water which is highly enriched with oxygen, is the ideal environment to ensure the highly efficient removal of toxins, ensuring perfect water conditions.
The Oase Proficlear Premium Compact - M - Pond Filter has a drain slide valve at the bottom of the tank which connects to Oase’s 75mm pipework. The filter is supplied with 2 year guarantee which can be upgraded to 3 years by registering with OASE. The filter has 5m of mains cable which connects to the weatherproof control box.
The Oase Proficlear Premium Compact - M - Gravity Fed Pond Filter has a single 110mm (4") outlet pipe and 2 x 50mm inlet connections which are compatible with the Oase Bitron C72 - 110C Ultra Violet Lights.
NEW - EGC (Easy Garden Control) System
The OASE ProfiClear Premium Compact - M has been upgraded to include Oase's EGC (Easy Garden Control) System, which give you the ability to connect this filter to the InScenio FM Master WLAN ECG wireless control system
FILTREAU COMBI NEXT (Including Internal Pump)
£2938.00
£2995.00
FILTREAU COMBI NEXT
FILTREAU COMBI NEXT (inc internal pump) Gravity Or Pump fed
The Filtreau Combi Next is a low-maintenance filter system that provides healthy, clear water, without the user having to perform daily maintenance.
The drum filter, combined with the 350L moving-bed bio-chamber and the 40W UVC Amalgam module, makes the filter suitable for (koi-)ponds up to as much as 45,000L!
The system is fitted as standard with 3 inlets (110mm) and 2 outlets (110mm). A waterflow of more than 30 m3/h can be achieved with this system!
The in/outlets are all at the front, so even in existed situations can this filter easily be added.
FILTREAU COMBI NEXT (External Pump Model)
£2590.00
£2630.00
FILTREAU COMBI NEXT
FILTREAU COMBI NEXT Gravity Or Pump fed
The Filtreau Combi Next is a low-maintenance filter system that provides healthy, clear water, without the user having to perform daily maintenance.
The drum filter, combined with the 350L moving-bed bio-chamber and the 40W UVC Amalgam module, makes the filter suitable for (koi-)ponds up to as much as 45,000L!
The system is fitted as standard with 3 inlets (110mm) and 2 outlets (110mm). A waterflow of more than 30 m3/h can be achieved with this system!
The in/outlets are all at the front, so even in existed situations can this filter easily be added.
With this model you will need the Filtreau external TIP Pressure Cleaning Pump (Please see water and air pumps section)
FILTREAU DRUM FILTER HF30
£1995.00
£1999.99
FILTREAU COMBI NEXT
Filtreau Drumfilter HF30 Gravity Or Pump fed
(NEW XL MOTOR & DOUBLE SEAL)
The Filtreau Drumfilter HF30 is a low maintenance pre-filter system that provides healthy, clear water, without the user having to perform daily maintenance.
The system is fitted as standard with two 110mm inlets and two 110mm outlets; when combined with a high-flow panel, this can provide a water flow of more than 30m3/h!
With this model you will need the Filtreau external TIP Pressure Cleaning Pump (Please see water and air pumps section)
The BioRotator Compact M
£4966.38
£5000.00
Air Aqua The BioRotator
The BioRotator is a drum filter combined with a continuously rotating biological filter.
The key properties at a glance:
- over 5x more waste substance breakdown by bacteria compared to so-called moving bed filters*
- the biological component ripens faster
- suitable for varying fish quantities/feed intensities
- no energy loss due to the need to pump water upwards compared to a trickle filter
- no air pump -> less nitrogen is dissolved into the water
BioRotator M
The BioRotator M comes with:
- lid
- control electronics
- Moving Bed Hel-X 17mm
This model has a separate motor for the BioRotator and has a built-in flushing pump as standard. 2 connections for the Super UV are also available as standard. The BioRotator M has 180 liters of Hel-X.
The BioRotators are very energy efficient, have compact dimensions, are made of high-quality materials and are completely automated. They are suitable for a gravity set-up and can also be used easily pump-fed.
About 60% of the biological component is above the surface of the water, in an oxygen-rich environment (20% compared to a maximum of 4% oxygen in water). This ensures optimal oxygen saturation. The effect of a trickle filter is imitated without the need to pump water upwards.
An air pump is not required for this filter type, which significantly reduces the negative effect of dissolving nitrogen in water. Since the biological filter material is surrounded by far more oxygen, the filter ripens faster and more efficiently. This also makes fluctuations in feed intensity easier to handle. Ammonia and nitrite are removed more quickly and more effectively compared to filters with fully submerged filter material. After use of a BioRotator, the water is richer in oxygen. On top of that, it contains fewer anaerobic (harmful) bacteria. The BioRotator is a high-grade total solution for Koi and swimming ponds with a maximum flow of 50m3/hour.
Method:
The water flows into the drum sieve, where any dirt larger than 70 microns (0.07mm) is removed. A water level sensor measures whether enough water flows through the drum. If the drum sieve becomes overly clogged, an automatic flushing programme is activated. The collected dirt is automatically removed from the sieve by means of the high-pressure pump and transported to the sewer via nozzles and a flushing channel.
Drum filter (Gravity or Pumped)
£1300.00
£1350.00
Drum filter (Gravity or Pumped)
Filtreau Drum filter
Filtreau Drum filters come complete with a built in 40watt Amalagam UV as well. There is no other prefilter available on the market that represents such a good price.
These Filtreau Drum filters have been produced to provide an entry level into the drum filter market. But the quality of these drum filters are superb for the price and represent excellent value for money.
Designed for ponds up to 5000 gallons these Filtreau Drum filters have two 4″ (110mm) inlets and one 110mm outlet for connection of the circulation pump, and one 4″ (110mm) outlet for the waste.
The drum filter comes complete with all the control gear and as mentioned above also has a 40watt Amalagam UV built in.
This drum filter, with it’s 60 micron screen will filter particles out of the ponds water automatically with the automatic cleaning process that is built into the drum. Sensors monoitor the water levels within the drum filter and a cleaning cycle is activated as and when necessary to ensure that all waste particles are removed and then flushed to waste.
An optional pressure pump can be purchased which wll be controlled by the drums built in controller and use the water held within the drum to clean the drum’s screen. Please see Water and Air Pumps
The motor that rotates the drum and the control gear have been used on other drum filters in the Netherlands and fully tested over the past 3 years so you can buy with confidence both on quality and reliability. It has a 2 year warranty on all parts (ex. screen elements)
We also have the 190L Bio-Chamber that will connect to this drum filter to provide all the biological filtration required for your pond and are now available to order. This option will then enable you to have the full benefits of a Bio-Compact system which are the most cost effective and environmentally friendly forms of pond filtration available as lower wattage pumps can be used on the circulation of your ponds water.
190Ltr Moving Bed filter
£419.90
£495.90
Filtreau Moving Bed filter
The perfect companion for the Filtreau Drum Filter! The Filtreau moving-bed is a bio filtration system with a 190L bio-chamber wich ensures crystal-clear water. The moving-bed is suitable for (koi) ponds up to as much as 30.000L!
The system is fitted as standard with one inlet (110mm) and one outlet (110mm). More inlets or outlets are also possible.
Advantages
Made in the Netherlands
100% Low pressure filtration‚ system
Energy efficient‚ and environmentally‚ friendly
Can be combined‚ perfectly with Filtreau Drumfilters
Easy Installation
2 Year warranty on manufacturing defects
Evolution Aqua Nexus Eazy 320+
£1595.00
£1599.00
Evolution Aqua Nexus Eazy 320+
Advanced filtration systems for Koi ponds now with NEW K+Media
Evolution Aqua have launched the Nexus320+ and Nexus220+filtration systems. Building on the tried and tested technology that has been ever present in the world renowned Nexus, the team at Evolution Aqua have gone even further to enhance their number one Koi pond filter.
The Nexus320+ and Nexus220+ filters now come with a brand new filter media called K+Media in the moving bed outer chamber for greatly improved biological filtration and much faster filter maturation. The new Nexus+ filters are also supplied “auto ready”, with factory fitted fixings already in place, making it even easier to upgrade to the Nexus Automatic Cleaning System.
How the Nexus+ Works
The Nexus+ filter is an innovative biological and mechanical filter system in one. Water from the pond enters the Nexus+ via the inlet into the inner chamber which works as a vortex allowing larger solids to settle out. The water then passes through Eazy filter, where finer particles are removed at the mechanical stage of filtration, thanks to the static bed of K1 Micro filter media.
The mechanically clean water then passes to the outside chamber of the Nexus+ where the new K+Media Moving Bed is located for biological treatment prior to being returned to the pond. At this stage, biological breakdown occurs through different strains of bacteria and filter feeders living on the vast protected surface area of each piece of the K+Media. These bacteria convert Ammonia and Nitrite into less harmful Nitrate. Water then passes through the exit grill into the outlet, returning back to the pond.
The Nexus 220+ includes a re-designed Eazy filter which now uses the all new K1 Micro filter media, in a fixed bed, to provide improved levels of mechanical purification. The Nexus filter systems additionally utilize the acclaimed KPlus Media in the relocating bed to deliver superior levels of biological filtration. With each other this mix of filter media work to deliver crystal clear and also healthy water.
All Nexus filtering systems can be set up on pump fed or gravity fed setups depending upon your fish pond setup. The Nexus 220 appropriates for fish ponds up to 18,000 litres (4,000 gallons) while for larger ponds the Nexus 320 can be set up on fish ponds as much as 34,000 litres (7,500 gallons).
Water from the fish pond enters the nexus via the inlet into the inner chamber which functions as a vortex enabling larger solids to resolve out.
Water then goes through the grills in the stainless-steel Eazy filter, where the finer fragments are gotten rid of at the mechanical phase of purification, thanks to the static bed of our award winning K1 Micro filter media.
The mechanically clean water then passes to the outside chamber of the nexus where the K1 Media moving bed lies for organic therapy before being gone back to the fish pond.
At this stage, organic break down takes place with various pressures of microorganisms and filter feeders residing on the protected area of each item of the K1 Media. These germs transform Ammonia as well as Nitrite into safe Nitrate.
Water then goes through the leave grill right into the electrical outlet, returning back to the pond.
The Eazy is a stainless-steel vessel having a set quantity of K1 Micro Media (20 litres in the Nexus 320 as well as 18 litres in the Nexus 220) which lies within the inner chamber of the Nexus. After water gets in the Nexus it turns around the Eazy in the internal chamber with a down motion allowing the bigger solids to resolve to the bottom of the chamber before passing through the slots of the Eazy right into the static K1 Micro. The water streams from all angles with the K1 Micro where enhanced mechanical filtration and negotiation occurs and also great particles are captured within the K1 Micro. The water after that flows via the slots in the centre column as well as right into the outer chamber.
The outer chamber of the Nexus consists of the moving bed of K1 Media. 100 litres of K1 Media is supplied with the Nexus 320 with the choice to add an additional 200 litres of K1 Media ought to it be required. The Nexus 220 is provided with 50 litres of K1 Media, with the choice to add an added 100 litres of K1 Media if needed. This permits the biological capability of your filter to expand with your fish.
The outer chamber is where the last of organic treatment takes place. Organic malfunction takes place with various stress of germs surviving on the protected surface area on each piece of the K1 Media. These bacteria transform Ammonia and also Nitrite right into harmless Nitrate. The amount of Ammonia as well as Nitrite generated in the fish pond is dependent on feed prices as well as the kind of food made use of. For higher feed prices extra K1 Media should be included into the external chamber.
You could enhance the biological capability of your Nexus by including added K1 Media right into the external chamber. You will nevertheless should make sure that you have the correct size of air pump to make it possible for the K1 Media to relocate completely (see table for suggested size of air pump).
For Nexus filtration systems straight out of the box without additional media added, we advise an Air Pump 75 to power the relocating bed in a Nexus 220 as well as an Air Pump 95 for a Nexus 320.
Nexus purification systems can be installed on PUMP FED or GRAVITY FED set-ups. In all situations the Nexus MUST be set up on a strong, level base, a minimum of 1.2 metres x 1 metre.
Pump Fed Set-Ups
By this we indicate that if your pump is most likely to be made use of to provide the water to the filter, and the filtered water after that returns back into your pond via gravity, i.e. down a waterfall, or via a large size pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
Gravity Fed Set-Ups
By this we imply that your pump is going to be utilized to return the filtered water to the fish pond and also therefore your filter will be supplied by gravity via a bigger size pipeline. In this situation the water level in the filter will certainly go to the very same degree as the fish pond.
Frequently Asked Questions
The water level in the outer chamber is much lower than in the inner chamber. Why?
• The pump could be too powerful, so the Nexus+ is being emptied before the pond refills it by gravity.
• There could be a blockage in the transfer port between the inner and chamber and the outer chamber. You need to back flush it.
• The Eazy needs cleaning. Or the Eazy’s steel screen needs cleaning. Beware of sharp edges!
What size pump do I need?
Maximum recommended flow on the 220 is 10,000lph and the 320 is 13,000lph, however suggested flow rates are lower. Slower is better for fine removal and clearer water. Aim to turn over your pond volume every two to three hours. The Evolution Aqua Varipump range are adjustable, and consume less energy when you turn them down.
Can NexusPlus be gravity or pump-fed?
Yes, it can easily be adapted to either filtration method by simply swapping the supplied rubber boots.
How much media does NexusPlus have/need?
The Nexus 220+ comes with 18 litres of K1 Micro in the Eazy (inner chamber,) and 50 litres of K+Media in the outer chamber.
The Nexus 320+ comes with 20 litres of K1 Micro in the Eazy (inner chamber,) and 100 litres of K+Media in the outer chamber.
For older models, the 300 and 310 contained 40 litres of K1 in the Eazy, and 30 litres for the 200 and 210.
Don’t change the amount of media in the Eazy as this affects particle capture, and ease of cleaning. The amount of media in the outer chamber can be increased however by up to 150 litres in total in the 220 and 300 litres in the 320 models.
Only increase the amount of media in the outer chambers for heavy stocking and heavy feeding. Note that if the total volume of media is increased in a newly set up filter it will take longer to mature, as there is more surface area for bacteria to colonise and the biofilm will be more thinly spread.
Media can be purchased from your Evolution Aqua dealer.
Do I need an airpump for NexusPlus?
Yes, it powers the moving bed biological filter and is also vital to the cleaning process. You need an Evolution Aqua Air Pump 75 for a Nexus 220 and an Air Pump 95 for a Nexus 320. If you increase the amount of media in the outer chamber you may well need a more powerful airpump.
The correct size airpump to enable the filter media to move is detailed in the below:
- 50 - 75 litres = Use an Air Pump 75
- 75 - 100 litres = Use an Air Pump 95
- 100 - 150 litres = Use an Air Pump 130
- 150 - 300 litres = Use an Air Pump 150
What is Nexus Automatic?
The Automatic is a separate system which can be fitted to Nexus filters, to enable automatic cleaning. By combining timers and automatic valves, Nexus can be converted and set to clean itself, as little or as often as required. It can be set to clean at night or while you are on holiday, and once set it means total hands-off cleaning. The more your filter is cleaned, the more that waste is removed from the system before being broken down. That means a cleaner pond, cleaner filter and healthier water.
The Automatic System can be fitted to all Nexus models manufactured after 2006, and both gravity fed or pump fed models. It can be fitted by the user or a pond filter installer. The Automatic system still requires a Nexus, airpump and a water pump, along with a power supply. During cleaning the Nexus will expel dirty water to waste, so an auto top-up fitted to the pond (not supplied,) is advised if the filter is set to clean frequently.
How long is the standpipe for the return in a NexusPlus that is pump-fed?
The return pipe is 40.5cm long in the 220 and 46cm long in the 320. This is a length of 4" pressure pipe which is factory fitted during production to the return chamber of the Nexus and sets the level of the water in the Nexus. It is removed when using the Nexus in a gravity fed pond. This can be quite difficult to retro fit as the hole is quite tight, you may find it easier using 110mm soil pipe as this has a slightly smaller outer diameter.
How much water is in the NexusPlus?
Nexus 220+
- Total volume of water 510 litres / 112 UK gallons / 135 US gallons
- Outer chamber 405 litres / 89 UK gallons / 107 US gallons
- Inner chamber 105 litres / 23 UK gallons / 28 US gallons
Nexus 320+
- Total volume of water 840 litres / 185 UK gallons / 222 US gallons
- Outer chamber 635 litres / 140 UK gallons / 168 US gallons
- Inner chamber 205 litres / 45 UK gallons / 54 US gallons
Waste not draining to waste when valve is opened.
Remove the outside union on the waste ball valve, open the valve, if no water pours out the blockage is under the Nexus, carefully push a suitable stick (such as a cane) and release the blockage, you can also remove the Eazy and access the pipe from the 1.5" hole in the bottom of the Nexus inner chamber.
How can I extend the draining time of my Nexus 320 Automatic.
You first need to remove the sticker of the far right side box and change the dial with a small screwdriver from 5 to 4, this will extend the cleaning time by one minute.
Evolution Aqua Nexus Eazy 220+
£1395.00
£1395.00
Evolution Aqua Nexus Eazy 220+
Advanced filtration systems for Koi ponds now with NEW K+Media
Evolution Aqua have launched the Nexus320+ and Nexus220+filtration systems. Building on the tried and tested technology that has been ever present in the world renowned Nexus, the team at Evolution Aqua have gone even further to enhance their number one Koi pond filter.
The Nexus320+ and Nexus220+ filters now come with a brand new filter media called K+Media in the moving bed outer chamber for greatly improved biological filtration and much faster filter maturation. The new Nexus+ filters are also supplied “auto ready”, with factory fitted fixings already in place, making it even easier to upgrade to the Nexus Automatic Cleaning System.
How the Nexus+ Works
The Nexus+ filter is an innovative biological and mechanical filter system in one. Water from the pond enters the Nexus+ via the inlet into the inner chamber which works as a vortex allowing larger solids to settle out. The water then passes through Eazy filter, where finer particles are removed at the mechanical stage of filtration, thanks to the static bed of K1 Micro filter media.
The mechanically clean water then passes to the outside chamber of the Nexus+ where the new K+Media Moving Bed is located for biological treatment prior to being returned to the pond. At this stage, biological breakdown occurs through different strains of bacteria and filter feeders living on the vast protected surface area of each piece of the K+Media. These bacteria convert Ammonia and Nitrite into less harmful Nitrate. Water then passes through the exit grill into the outlet, returning back to the pond.
The Nexus 220+ includes a re-designed Eazy filter which now uses the all new K1 Micro filter media, in a fixed bed, to provide improved levels of mechanical purification. The Nexus filter systems additionally utilize the acclaimed KPlus Media in the relocating bed to deliver superior levels of biological filtration. With each other this mix of filter media work to deliver crystal clear and also healthy water.
All Nexus filtering systems can be set up on pump fed or gravity fed setups depending upon your fish pond setup. The Nexus 220 appropriates for fish ponds up to 18,000 litres (4,000 gallons) while for larger ponds the Nexus 320 can be set up on fish ponds as much as 34,000 litres (7,500 gallons).
Water from the fish pond enters the nexus via the inlet into the inner chamber which functions as a vortex enabling larger solids to resolve out.
Water then goes through the grills in the stainless-steel Eazy filter, where the finer fragments are gotten rid of at the mechanical phase of purification, thanks to the static bed of our award winning K1 Micro filter media.
The mechanically clean water then passes to the outside chamber of the nexus where the K1 Media moving bed lies for organic therapy before being gone back to the fish pond.
At this stage, organic break down takes place with various pressures of microorganisms and filter feeders residing on the protected area of each item of the K1 Media. These germs transform Ammonia as well as Nitrite into safe Nitrate.
Water then goes through the leave grill right into the electrical outlet, returning back to the pond.
The Eazy is a stainless-steel vessel having a set quantity of K1 Micro Media (20 litres in the Nexus 320 as well as 18 litres in the Nexus 220) which lies within the inner chamber of the Nexus. After water gets in the Nexus it turns around the Eazy in the internal chamber with a down motion allowing the bigger solids to resolve to the bottom of the chamber before passing through the slots of the Eazy right into the static K1 Micro. The water streams from all angles with the K1 Micro where enhanced mechanical filtration and negotiation occurs and also great particles are captured within the K1 Micro. The water after that flows via the slots in the centre column as well as right into the outer chamber.
The outer chamber of the Nexus consists of the moving bed of K1 Media. 100 litres of K1 Media is supplied with the Nexus 320 with the choice to add an additional 200 litres of K1 Media ought to it be required. The Nexus 220 is provided with 50 litres of K1 Media, with the choice to add an added 100 litres of K1 Media if needed. This permits the biological capability of your filter to expand with your fish.
The outer chamber is where the last of organic treatment takes place. Organic malfunction takes place with various stress of germs surviving on the protected surface area on each piece of the K1 Media. These bacteria transform Ammonia and also Nitrite right into harmless Nitrate. The amount of Ammonia as well as Nitrite generated in the fish pond is dependent on feed prices as well as the kind of food made use of. For higher feed prices extra K1 Media should be included into the external chamber.
You could enhance the biological capability of your Nexus by including added K1 Media right into the external chamber. You will nevertheless should make sure that you have the correct size of air pump to make it possible for the K1 Media to relocate completely (see table for suggested size of air pump).
For Nexus filtration systems straight out of the box without additional media added, we advise an Air Pump 75 to power the relocating bed in a Nexus 220 as well as an Air Pump 95 for a Nexus 320.
Nexus purification systems can be installed on PUMP FED or GRAVITY FED set-ups. In all situations the Nexus MUST be set up on a strong, level base, a minimum of 1.2 metres x 1 metre.
Pump Fed Set-Ups
By this we indicate that if your pump is most likely to be made use of to provide the water to the filter, and the filtered water after that returns back into your pond via gravity, i.e. down a waterfall, or via a large size pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
Gravity Fed Set-Ups
By this we imply that your pump is going to be utilized to return the filtered water to the fish pond and also therefore your filter will be supplied by gravity via a bigger size pipeline. In this situation the water level in the filter will certainly go to the very same degree as the fish pond.
Frequently Asked Questions
The water level in the outer chamber is much lower than in the inner chamber. Why?
• The pump could be too powerful, so the Nexus+ is being emptied before the pond refills it by gravity.
• There could be a blockage in the transfer port between the inner and chamber and the outer chamber. You need to back flush it.
• The Eazy needs cleaning. Or the Eazy’s steel screen needs cleaning. Beware of sharp edges!
What size pump do I need?
Maximum recommended flow on the 220 is 10,000lph and the 320 is 13,000lph, however suggested flow rates are lower. Slower is better for fine removal and clearer water. Aim to turn over your pond volume every two to three hours. The Evolution Aqua Varipump range are adjustable, and consume less energy when you turn them down.
Can NexusPlus be gravity or pump-fed?
Yes, it can easily be adapted to either filtration method by simply swapping the supplied rubber boots.
How much media does NexusPlus have/need?
The Nexus 220+ comes with 18 litres of K1 Micro in the Eazy (inner chamber,) and 50 litres of K+Media in the outer chamber.
The Nexus 320+ comes with 20 litres of K1 Micro in the Eazy (inner chamber,) and 100 litres of K+Media in the outer chamber.
For older models, the 300 and 310 contained 40 litres of K1 in the Eazy, and 30 litres for the 200 and 210.
Don’t change the amount of media in the Eazy as this affects particle capture, and ease of cleaning. The amount of media in the outer chamber can be increased however by up to 150 litres in total in the 220 and 300 litres in the 320 models.
Only increase the amount of media in the outer chambers for heavy stocking and heavy feeding. Note that if the total volume of media is increased in a newly set up filter it will take longer to mature, as there is more surface area for bacteria to colonise and the biofilm will be more thinly spread.
Media can be purchased from your Evolution Aqua dealer.
Do I need an airpump for NexusPlus?
Yes, it powers the moving bed biological filter and is also vital to the cleaning process. You need an Evolution Aqua Air Pump 75 for a Nexus 220 and an Air Pump 95 for a Nexus 320. If you increase the amount of media in the outer chamber you may well need a more powerful airpump.
The correct size airpump to enable the filter media to move is detailed in the below:
- 50 - 75 litres = Use an Air Pump 75
- 75 - 100 litres = Use an Air Pump 95
- 100 - 150 litres = Use an Air Pump 130
- 150 - 300 litres = Use an Air Pump 150
What is Nexus Automatic?
The Automatic is a separate system which can be fitted to Nexus filters, to enable automatic cleaning. By combining timers and automatic valves, Nexus can be converted and set to clean itself, as little or as often as required. It can be set to clean at night or while you are on holiday, and once set it means total hands-off cleaning. The more your filter is cleaned, the more that waste is removed from the system before being broken down. That means a cleaner pond, cleaner filter and healthier water.
The Automatic System can be fitted to all Nexus models manufactured after 2006, and both gravity fed or pump fed models. It can be fitted by the user or a pond filter installer. The Automatic system still requires a Nexus, airpump and a water pump, along with a power supply. During cleaning the Nexus will expel dirty water to waste, so an auto top-up fitted to the pond (not supplied,) is advised if the filter is set to clean frequently.
How long is the standpipe for the return in a NexusPlus that is pump-fed?
The return pipe is 40.5cm long in the 220 and 46cm long in the 320. This is a length of 4" pressure pipe which is factory fitted during production to the return chamber of the Nexus and sets the level of the water in the Nexus. It is removed when using the Nexus in a gravity fed pond. This can be quite difficult to retro fit as the hole is quite tight, you may find it easier using 110mm soil pipe as this has a slightly smaller outer diameter.
How much water is in the NexusPlus?
Nexus 220+
- Total volume of water 510 litres / 112 UK gallons / 135 US gallons
- Outer chamber 405 litres / 89 UK gallons / 107 US gallons
- Inner chamber 105 litres / 23 UK gallons / 28 US gallons
Nexus 320+
- Total volume of water 840 litres / 185 UK gallons / 222 US gallons
- Outer chamber 635 litres / 140 UK gallons / 168 US gallons
- Inner chamber 205 litres / 45 UK gallons / 54 US gallons
Waste not draining to waste when valve is opened.
Remove the outside union on the waste ball valve, open the valve, if no water pours out the blockage is under the Nexus, carefully push a suitable stick (such as a cane) and release the blockage, you can also remove the Eazy and access the pipe from the 1.5" hole in the bottom of the Nexus inner chamber.
How can I extend the draining time of my Nexus 320 Automatic.
You first need to remove the sticker of the far right side box and change the dial with a small screwdriver from 5 to 4, this will extend the cleaning time by one minute
Eazy Pod Automatic (Without UV)
£749.90
£759.90
Eazy Pod Automatic (With Out UV)
- Self cleaning mechanical & biological pond filter
- Suitable for ponds up to 10,000
- Very easy to install and operate
- Utilises K1 Micro Media
- Complete with adjustable rubber connectors
- Designed for pump fed installation only
Eazy Pod Complete (With UV)
£679.90
£695.00
Eazy Pod Complete (With UV)
- Eazy cleaning mechanical & biological pond filter
- Suitable for ponds up to 10,000
- Very easy to install and operate
- Utilises K1 Micro Media
- With 18watt UV & 70Lpm Air Pump with Air Stones & 4mm Air lines
- Complete with adjustable rubber connectors
- Designed for pump fed installation and Gravity
Eazy Pod Air (inc pump & kit)
£610.00
£695.00
Eazy Pod Air (With Out UV)
-
Easy to use filter system
A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres.
The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter.
Available in Grey or Granite Green colours.
Overview
A compact member of the Nexus family, the EazyPod is a mechanical and biological filter system for ponds up to 10,000 litres. The EazyPod utilises 18 litres of static K1 Micro, which provides enhanced biological benefits, even when using the EazyPod solely as a mechanical waste filter. Also available as EazyPodAir models, which come supplied with AirPump70 Kit.
How the EazyPod works
Water from the pond enters the EazyPod via the inlet and then flows around the circumference of the outer chamber of the EazyPod, passing through the stainless steel grill causing many of the larger solids to be filtered out and settle in the base of the outer chamber. This is the first stage of mechanical filtration. As water enters the central chamber, through the stainless steel grill, the fine smaller solids become trapped in the mass of K1 Micro. Bio-films build up on the protected surface area within each piece of media, allowing biological filtration to take place. After passing through the K1 Micro, the clean water then rises and overflows into the inner return pipe and flows back to the pond via the outlet. The EazyPod is incredibly simple to clean. The connected air pump is used during the cleaning cycle to agitate the K1 Micro to free up any debris and waste that has built up within the filter. A 70 litre per minute air pump is recommended for use during the cycle cleaning. *Only EazyPodAir and EazyPod Complete models are supplied with a 70 litre per minute air pump and accessory kit.
Installing the EazyPod
PUMP-FED INSTALLATION
By this we mean that if your pump is going to be used to supply the water to the filter, and the filtered water then returns back into your pond via gravity, i.e. down a waterfall, or through a large diameter pipe, this is referred to as PUMP FED (i.e. the water is fed to the filter using a pump).
GRAVITY-FED INSTALLATION
*User modification is required on the EazyPod to enable Gravity Fed installation. By this we mean that your pump is going to be used to return the filtered water to the pond and therefore your filter will be supplied by gravity via a larger diameter pipe. In this situation the water level in the filter will be at the same level as the pond.
Evolution Aqua Tempest Filter
£265.90
£269.95
Evolution Aqua Tempest Filter
The NEW Tempest Filter is an innovative polishing system for ponds. The Tempest Filter uses our latest filtration media, K+Media, to deliver crystal clear, healthy water.
Designed to be used in conjunction with any filtration system, the Tempest Filter offers additional mechanical and biological filtration. The Tempest Filter can be installed on a variety of set-ups and can be used on quarantine systems or as astandalone filter on smaller ponds up to 5,000 Litres / 1,100 Gallons.
Features:
• Ideal as a polisher to deliver crystal clear, healthy water
• Designed to be used in conjunction with most filtration systems
• Can also be used as standalone filter on smaller ponds
• Quick and easy to clean - patent pending air syphon design
• Uses K+Media as mechanical and biological filtration media
• Traps particles down to one micron
• Easy to install
• Low maintenance
• 2 year UK guarantee
Technical:
• Dimensions: 1100mm Long x 350mm Wide x 200mm Deep
• Filter Volume: 25 litres
• Inlet Connection: 1 1/2"
• Outlet Connection: 1 1/2"
• Waste Discharge Connection: 1"
• Recommended Flow Rate: 5000 litres per hour
• Maximum Flow Rate: 7500 litres per hour
• K+ Media Supplied: 7 litres
• Guarantee: 2 Years
Red Label - Protein Skimmer
£590.00
£610.00
Red Label - Protein Skimmer
Red Label - Protein Skimmer
The dirt in the pond from bacteria and enzymes break down into small particles, so small that the protein eventually dissolves into the water. A mechanical filter can not remove these particles. A protein skimmer removes them before they are broken down further into more harmful substances(ammonium, nitrite, nitrate, phosphate etc) Proteins assemble at the interface between air and water.
The water is mixed with the air through a venturi system. Then the water/ air mixture is spread over a bio wheels. This increases the surface area, causing the protein to form a solid foam. The foam is finally stripped from the pond water and dispersed from a 50mm outlet.
Maximum flow 6.500 liter
Inlet 1x 1” 32 mm
Outlet 50 mm
Compact Sieve II Pump Fed
£249.90
£272.99
Compact Sieve II Pump Fed Only
AQUAFORTE COMPACTSIEVE II PUMP FED SIEVE FILTER: Compact version of the UltraSieve for use only in a pump fed configuration. The Stainless Steel filter element has a width of 24 cm and a length of 40cm with 300 micron openings. Maximum flow rate is approximately 15 m³/h. Pump inlet: 25/32/40mm hose tail. Housing: dark-green or blue granite coloured PE. Shipped with cover. Output and overflow: 75mm push fittings. Very easy to use: a dirty water pond pump is connected directly to the CompactSieve input. The water flows through the sieve which removes all particle matter down to a size of 300 micron. The CompactSieve must always be installed above pond level. Now available in dark green and granite blue. Applications: - As a particle remover directly next to the pond or to a waterfall/stream return to pond. - As a mechanical particle waste pre-filter before surface mounted biological stages. - As a mechanical pre-filter for existing trickle filter systems. - The unit can be connected to a pond vacuum cleaner and the returned water from the vacuum cleaner can be fed into the input hose tail via a T-piece or directly. For extra particle removal and saving your precious matured pond water - The unit can be connected to an existing pumped pond skimmer system. The unit must be mounted above pond water level.
Size's 49 x 32 x 55 cm; 8.2 Kilograms
Infrared Bacteria Home
£69.99
£72.99
Infrared Bacteria Home
Bacteria Home 72 x 180 is a high-grade
filter medium made of mineral rock. The
rock is baked under very high temperatures.
It is especially effective in a bakki shower,
but can also be used in different filters.
The microscopic pores in the rock allow
for high concentrations of good bacteria.
The bacteria improve the quality of your
water and filter out any harmful particles
such as nitrate, nitrite, and ammonia.
Additionally, Far Infrared Bacteria Home improves the mineral and redox-values
of the water. Simultaneously, the water is oxygenated, more effectively than with
for instance bottom drain filters. Bacteria Home improves the quality of your
water up to 16 times more effectively
than underwater filtration systems.
Thickness: 72mm
Length: 180mm
10kg Far Infrared Bacteria Home is a
approximately 35 liters of filtermedium.
Bacteria Home improves the water quality, clarity, and decreases algae growth.
The special porous ceramic forms the ideal habitat for the bacteria to attach.
Not only does this keep your koi healthy, but it also naturally filters dirt and even
algae! Dangerous substances and particles in your pond are broken down by the
bacteria into less harmful nitrate. Then, anaerobe bacteria lower the nitrate
content in the water. This way your pond doesn't only become cleaner, but it
becomes clearer too.
OASE Hel-X Media 25ltrs
£44.95
£49.99
OASE Hel-X Media 25ltrs
The new Hel-X 13 Biomedia from Oase is aptly named because it now has a 13% increase in the biological settlement surface area compared to previous Hel-X Biomedia. The new and improved Oase Hel-X 13 Biomedia has been especially designed for use within the Oase ProfiClear Premium Moving Bed Module and Oase ProfiClear Premium Compact range of Drum Filter systems.
The unique Hel-X 13 helical geometry offers low flow resistance whilst providing maximum protected surface area which is indispensable for maintaining a stable bio film. The bacteria and micro organisms which make up the bio film biologically break down food and fish waste within the filter system, resulting in healthy water for your fish. 25 Litres of Oase Hel-X 13 Biomedia has the capacity to biologically break down 170g of food per day and also boasts 40% more settlement area than K1 Media.
Hel-X 13 Moving bed filter media from Oase
25L bag delivered in an unopened Oase bag.
13% extra surface area than previous Hel-X Biomedia
Maintenance free self cleaning media
Rapid breakdown of food and fish waste
Suitable for all moving bed filtration
955m²/m³ Settlement surface area
806m²/m³ Protected settlement surface area
40% more settlement surface than Kaldness K1 Media
25 Litres of Hel-X 13 will decompose 170g of food waste per day
K1 Micro Media - 25ltr
£54.95
£59.99
K1 Micro Media - 25ltr
K1 Moving Bed process, which has been scientifically tried and tested in fish
farming and waste water treatment for over 10 years, is now available for fish
keepers and is exclusively distributed worldwide by Evolution Aqua.
The media is engineered in a wheel shape and is slightly positively buoyant.
This allows a small amount of water flow to circulate the media throughout the
vessel. This flow is created with your air pump and air stones or diffuser etc.
K1 Micro Media - 50ltr
£89.90
£99.99
K1 Micro Media - 50ltr
K1 Moving Bed process, which has been scientifically tried and tested in fish
farming and waste water treatment for over 10 years, is now available for fish
keepers and is exclusively distributed worldwide by Evolution Aqua.
The media is engineered in a wheel shape and is slightly positively buoyant.
This allows a small amount of water flow to circulate the media throughout the
vessel. This flow is created with your air pump and air stones or diffuser etc.
K+ Advanced Media 25Litre
£48.90
£49.99
K+ Advanced Filter Media 25Litre
25 Litre of Floating Evolution Aqua K+ Floating Media with its innovative design, and class leading surface area provides enhanced biological and mechanical filtration. As Evolution Aqua extrude K+Media, Minerals and Enzymes are added to the raw material. The result of this process, unique to Evolution Aqua, is a filtration media that not only outperforms most of its competitors due to its large protected surface area, but also answers the problem of how to speed up the time taken to mature your filter.
K+ Advanced Media 50Litre
£83.90
£84.99
K+ Advanced Filter Media 50Litre
50 Litre of Floating Evolution Aqua K+ Floating Media with its innovative design, and class leading surface area provides enhanced biological and mechanical filtration. As Evolution Aqua extrude K+Media, Minerals and Enzymes are added to the raw material. The result of this process, unique to Evolution Aqua, is a filtration media that not only outperforms most of its competitors due to its large protected surface area, but also answers the problem of how to speed up the time taken to mature your filter.
EVO 25w UVC
£109.95
£119.99
EVO 25w UVC
Evolution Aqua’s pond UV clarifiers have been completely re-designed for 2021, to deliver even greater performance and improved serviceability. Our range of six evoUV pond clarifiers are made using the very latest technology and design techniques, ensuring there is even water flow through the unit, and optimum ultraviolet light penetration.
Overview of Features
- Improves water clarity by eradicating green water
- High output, energy efficient ballast
- Fully serviceable for easy maintenance
- Easy to install
- Available in six models
- 2 year guarantee
Evo25 20,000 Litres 4,400 UK Gallons 5,284 US Gallons 10,000 Litres/hr 2,200 UK Gallons/hr 2,642 US Gallons/hr 25W (1 x 25W T8) 1½" 2 x 1½" Threaded Hosetails
25w UV Osram Lamp
£11.50
£11.99
25w UV Osram Lamp
Replacement 25W UV Osram Lamp for Evo25 and other various models
EVO 55w UVC
£169.95
£189.95
EVO 55w UVC
Professional ultraviolet clarifiers for ponds
Evolution Aqua’s pond UV clarifiers have been completely re-designed for 2021, to deliver even greater performance and improved serviceability. Our range of six evoUV pond clarifiers are made using the very latest technology and design techniques, ensuring there is even water flow through the unit, and optimum ultraviolet light penetration.
Overview of Features
- Improves water clarity by eradicating green water
- High output, energy efficient ballast
- Fully serviceable for easy maintenance
- Easy to install
- Available in six models
- 2 year guarantee
Evo55 55,000 Litres 12,100 UK Gallons 14,530 US Gallons 20,000 Litres/hr 4,400 UK Gallons/hr 5,284 US Gallons/hr 55W (1 X 55W T8) 1½" 2 x 1½" Threaded Hosetails
55w UV Osram Lamp
£14.50
£14.99
55w UV Osram Lamp
Replacement 55W UV Osram Lamp for Evo55 and other various models
Amalgam 40W Submersible UVC
£230.90
£240.50
Amalgam 40W Submersible UVC
Amalgam 40W Submersible UVC (3 Piece)
These lamps can be used in filter tanks so the water can pass without any resistance/pressure loss
NOTE: the UV-C Radiation range is limited (dependent on i.e. the water clarity) so only a part of the flowing water is treated. The user is responsible for the dangers of exposure to the UV-C radiation to the eye.
Use the supplied safety glasses and/or a safety switch that automatically switches the lamp off when you have access to the lamp.
WARNING: Please make sure that the lamp is always completely underwater!
The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in the tank. The T5 lamp has a 9000 hour lifespan and a 25000 microwatt output. A special tank connector is now available for direct installation in i.e filters.
Amalgam 40W UVC Lamp
£119.00
£124.99
Amalgam 40W UVC Lamp
Replacement lamp for Amalgam 40W Submersible UVC
Amalgam 80W Submersible UVC
£251.50
£263.50
Amalgam 80W Submersible UVC
Amalgam 80W Submersible UVC (3 Piece)
These lamps can be used in filter tanks so the water can pass without any resistance/pressure loss
NOTE: the UV-C Radiation range is limited (dependent on i.e. the water clarity) so only a part of the flowing water is treated. The user is responsible for the dangers of exposure to the UV-C radiation to the eye.
Use the supplied safety glasses and/or a safety switch that automatically switches the lamp off when you have access to the lamp.
WARNING: Please make sure that the lamp is always completely underwater!
The plastic end of the lamp has a 32mm diameter so you can use 32mm pipe clips to mount the lamp in the tank. The T5 lamp has a 9000 hour lifespan and a 25000 microwatt output. A special tank connector is now available for direct installation in i.e filters.
Amalgam 80W UVC Lamp
£139.90
£144.99
Amalgam 80W UVC Lamp
Replacement lamp for Amalgam 40W Submersible UVC
32mm Connector Submersible UVC
£9.80
£12.00
32mm Connector submersible UVC
32mm Connector for submersible UVC Mounting this special tank connector is now available for direct installation for the Amalgam UVC
Filtreau 40w Amalgam Submersible (Inc Tank Con)
£185.90
£189.00
Filtreau 40w Amalgam Submersible UVC (Inc Tank Con)
Replacement Filtreau 40w amalgam Submersible UVC (inc tank con)
ADVANTAGES:
• Made in The Netherlands.
• LED indication when the lamp needs replacing.
• Amalgam UV-C lamp incl. long-life technology (12.000Hours).
• Perfectly matched electronic ballast and UV-C lamp.
• Energy efficient and environmentally friendly.
• 2 year warranty on manufacturing defects.
• Completely automatic control.
• Very low maintenance.
• Very small pumps required, no pressure pumps needed anymore.
• Extra safety switch, when the water-level is too low it switches to ‘Safety-mode
Filtreau 40w Amalgam Replacement Lamp
£45.90
£49.99
Filtreau 40w Amalgam Replacement Lamp
Filtreau 40w Amalgam Replacement Lamp
OASE Aquamax Eco Premium 6000
£279.90
£389.99
OASE Aquamax Eco Premium 6000
OASE Aquamax Eco Premium 6000
- Outstanding energy efficiency and displacement capacity
- Only 45 Watts
- Simultaneous supply of debris through connection of filter accessories on the patented, second inlet
- Patented frost protection to -20°C
- Great for a stand alone eazypod with skimmer outlet for a Oase Aquaskim 20
Product details
Regulation + 2nd Inlet
A 2nd inlet allows connection of a satellite filter or surface skimmer. This allows the flow through to be mechanically adjusted from 0 to 100 %.
DM-Vario S 10000
£235.99
£259.99
AQUAFORTE DM-Vario S 10000
The DM-Vario S pumps are suited for outdoor use and are suited for wet & dry applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and wearproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out.
DM-Vario S 22000
£329.99
£334.99
AQUAFORTE DM-Vario S 22000
The DM-Vario S pumps are suited for outdoor use and are suited for wet & dry applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and wearproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out.
DM-Vario S 30000
£425.99
£459.99
AQUAFORTE DM-Vario S 30000
The DM-Vario S pumps are suited for outdoor use and are suited for wet & dry applications. With the external controller you can adjust the flow (and thus the energy consumption) from 30% to 100%. The controller can also start/stop the pump (pause button). Provided with synchronous motor and wearproof ceramic shaft for long time use. Automatic power-off protection when running dry. When the impeller is blocked it will go into a “lock” position in which the pump does not use power and waits until the blockage is gone. This will prevent a motor burn out.
EA Varipump 10000
£179.95
£199.95
1000 LPH High performance pump
Varipump by Evolution Aqua is
a controllable pond pump,
suitable for large ponds.
Output and energy
consumption can be
controlled at the push of a
button and the six pole, three phase motor is quiet and reliable. Available in three sizes, Varipump is
powerful enough to run the largest of ponds and filters, and in the most demanding of situations.
Varipump is suitable for use in and out of a pond. Hosetail fittings included.
*Two year warranty on all models.* Max Watts 75
EA Varipump 20000
£239.90
£249.99
20000 LPH High performance pump
Varipump by Evolution Aqua is
a controllable pond pump,
suitable for large ponds.
Output and energy
consumption can be
controlled at the push of a
button and the six pole, three phase motor is quiet and reliable. Available in three sizes, Varipump is
powerful enough to run the largest of ponds and filters, and in the most demanding of situations.
Varipump is suitable for use in and out of a pond. Hosetail fittings included.
*Two year warranty on all models.* Max Watts 190
EA Varipump 30000
£369.90
£384.95
30000 LPH High performance pump
Varipump by Evolution Aqua is
a controllable pond pump,
suitable for large ponds.
Output and energy
consumption can be
controlled at the push of a
button and the six pole, three phase motor is quiet and reliable. Available in three sizes, Varipump is
powerful enough to run the largest of ponds and filters, and in the most demanding of situations.
Varipump is suitable for use in and out of a pond. Hosetail fittings included.
*Two year warranty on all models.* Max Watts 450
Filtreau TIP Pressure Cleaning Pump
£149.90
£159.99
Filtreau TIP Pressure Cleaning Pump
TIP Cleaning pump for Filtreau Filter Systems
EA AirTech 95ltr Pump
£249.00
£275.50
EA AirTech 95ltr Pump
The Evolution Aqua Air pump range provides high performance diaphragm air pumps for all fish keepers. Provides consistent levels of oxygen in ponds.
BRESSER Biolux NV 20x-1280x Microscope HD USB camera
£149.90
£169.99
BRESSER Biolux NV 20x-1280x
The BRESSER Biolux NV comes with a wide range of accessories and is an ideal beginners' microscope. A unique feature of these models, the Barlow zoom system is inside the eyepiece tubes: With the barlow lens the magnification can be varied by a factor of 2 in visual observation. This feature, together with 3 objectives and 2 interchangeable wide field eyepieces gives a magnification range from 20x to 1280x. With the mechanical desk you can move your sample precisely even when observing at high magnifications.
For optimal illumination a variable LED for transmitted and incident light together with a filter wheel gives the ideal light for all samples. Light from above is especially imortant to observe non transparent samples like leaves, small insects and much more. This makes microscopy for beginners very easy! The power is supplied by batteries (3x AA). A dust cover, 5 prepared slides and 5 blank slides and cover slips are included for making your own samples.
With the included HD camera you can observe your samples on the computer screen, and capture images and video with the included Windows software. The software is compatible with Windos 7 / 8 and Win 10. With this camera, you can always document your interesting observations and share them with others.
FEATURES
- biological microscope with HD camera
- LED light for transmitted and incident light
- battery-powered
- lots of accessories
- incident light for objects not higher than 4mm
SCOPE OF DELIVERY
- Solid metal Microscope
- mechanical desk
- HD camera with metal housing, resolution 1280 x 720
- 2 eyepieces: 5x and 16x
- 3 objectives: 4x, 10x and 40x
- 1 Barlow lens with 2x magnification
- Microscope tools
- mechanical cross table
- 5 prepared slides
- 5 blank slides
- 3x AA batteries
- Dust cover and hard case
BRESSER Biolux Touch 5MP HDMI digital Microscope
£277.50
£299.90
BRESSER Biolux Touch 5MP HDMI
Make amazing discoveries in the microcosmos and capture image and video? That is now possible and you don't need a PC to do it. The digital BRESSER Biolux Touch HDMI microscope is the perfect tool to do it. It is very versatile, ideal for school and hobby. You can easily view the image on the touchscreen. The integrated, high quality 5MP camera sensor captures images and HD videos directly onto an SD card (SD card not included).
The camera is controlled via the touch screen with an intuitive and multi language user menu. With two fingers you can zoom in to see even more detail.
The microscope is also perfect to use in schools, for teaching or seminars. The live stream from the microscope can be viewed on a big monitor or TV screen with the HDMI connection. HDMI will deliver a latency free video stream with a framerate of 30 fps.
The mechanical crosstable and the coarse and fine focus makes adjusting and screening the sample easy. The 40x objective is sufficient to view small microorganisms and even bacteria, e.g. from a hay infusion. With the additional reflected light you can also view (small) non transparent samples, like plant matter, sand, or insects. The reflected light should be used with the 4x lens. A sample preparation is usually not necessary in this viewing mode, which makes it especially easy for children to get their first glimpse of the micro world.
FEATURES
- capture images and HD video directly, no PC needed
- with 5MP Aptina CMOS camera sensor
- LCD screen with touch and zoom function
- with fine focus and mechanical crosstable
- slot for SD card (up to 32GB, not included)
- Micro HDMI socket
- USB socket
- 3 objectives: 4x/10x/40x
- LED light (transmitted / reflected), dimmable
- with many accessories
SCOPE OF DELIVERY
- microscope with touch screen
- HDMI cable
- AC adapter 5V 2A (EU)
- Set of tools (preparation needles, pipette, tweezers, MikroCut)
- Artemia set to hatch fairy shrimps
- case with 5 prepared slides, 10 empty slides and 10 cover glasses
- dust cover
Ammonia Low Range Checker 0.00-3.00ppm
£80.90
£80.95
Ammonia Low Range Checker 0.00-3.00ppm
Ammonia Low Range Checker 0.00-3.00ppm
The checker is supplied with 2 cuvettes and caps, reagents for 25 tests, 1 x AAA battery and instruction manual and case.
Spare reagents can be purchased, these come with 2 x bottles to test 25 times
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ± 5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
"What our clients say"
Paul Blundell "Yet another hassle free shopping experience from Paul Koi Chronicles Hanna test kits this time and a free KC towel Again very well packaged Thanks again Paul"
Nitrite Low Range Checker 0-600ppb
£80.90
£80.95
Nitrite Low Range Checker 0-600ppb
Nitrite Low Range Checker 0-600ppb
The checker is supplied with 2 cuvettes and caps, reagent starter kit (6 tests), 1 x AAA battery and instruction manual and case.
Spare reagents can be purchased, these come with 2 x bottles to test 25 times
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ± 5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
"What our clients say"
Paul Blundell "Yet another hassle free shopping experience from Paul Koi Chronicles Hanna test kits this time and a free KC towel Again very well packaged Thanks again Paul"
Total Chlorine Ultra Low Range Handheld Colorimeter
£80.90
£80.95
Total Chlorine Ultra Low Range Handheld Colorimeter
Total Chlorine Ultra Low Range Handheld Colorimeter
The Checker is a simple, accurate, and cost effective way to measure ultra-low ranges of total chlorine.
Checker®HC is supplied with reagents for 6 tests (25 tests) for future purchases.
Supplied with
- 2 sample cuvettes
- Cuvette cap
- Starter pack of reagents
- 1 x 1.5 AAA battery
- Instructions
Four steps, one click instant readout
- Zero the Checker
- Add reagent
- Insert sample into Checker
- Press button for results
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ± 5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
"What our clients say"
Paul Blundell "Yet another hassle free shopping experience from Paul Koi Chronicles Hanna test kits this time and a free KC towel Again very well packaged Thanks again Paul"
Free Chlorine Colorimeter
£80.90
£80.95
Free Chlorine Colorimeter
Free Chlorine Handheld Colorimeter
The Checker is a simple, accurate, and cost effective way to measure ultra-low ranges of total chlorine.
Checker is supplied with reagents for 6 tests (25 tests) for future purchases.
Supplied with
- 2 sample cuvettes
- Cuvette cap
- Starter pack of reagents
- 1 x 1.5 AAA battery
- Instructions
Four steps, one click instant readout
- Zero the Checker
- Add reagent
- Insert sample into Checker
- Press button for results
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ± 5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
"What our clients say"
Paul Blundell "Yet another hassle free shopping experience from Paul Koi Chronicles Hanna test kits this time and a free KC towel Again very well packaged Thanks again Paul"
Freshwater Alkalinity Colorimeter (KH) 0 to 500 ppm
£80.90
£80.95
Freshwater Alkalinity Colorimeter (KH) 0 to 500 ppm
Freshwater Alkalinity Colorimeter (KH) 0 to 500 ppm
The checker is supplied with 2 cuvettes and caps, reagents for 25 tests, 1 x AAA battery and instruction manual and case.
Spare reagents can be purchased, these come with 2 x bottles to test 25 times
Key features
- Small palm-sized design
- Accurate from ±0.05ppm ± 5% of reading
- Dedicated to a single parameter
- Uses a single AAA battery
- Auto Power Off after 10 minutes in inactivity
- Built-in timer for timed reaction readings
Please note: Any chlorine present in the sample will interfere with the reading. To remove the chlorine interference add one drop of Chlorine Remover to the unreacted sample prior to testing. Contact us or Ask A Question? for more details!
"What our clients say"
Paul Blundell "Yet another hassle free shopping experience from Paul Koi Chronicles Hanna test kits this time and a free KC towel Again very well packaged Thanks again Paul"
Spare Reagent 25 tests Ammonia LR
£27.90
£27.95
Spare Reagent 25 tests Ammonia LR
Spare Reagent 25 tests Ammonia LR
This 25 pack of reagents is for use with the HI-700 Ammonia Low Range Pocket Checker.
The HI-700-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Ammonia Checker® HC. These reagents follow the Nessler Method in which the reaction between ammonia and reagents causes a yellow tint in the sample. By simply adding 4 drops from each bottle of HI-700-25 reagent set to the sample, the reaction will take place and the HI-700 will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of ammonia-nitrogen (NH3-N). These reagents are designed to be used with samples that have an expected range of 0.00 to 3.00 ppm ammonia-nitrogen. To convert the reading to ppm of ammonia (NH3) multiply the result by 1.214.
Reagents for HI 761 Total Chlorine, ultra-low range pocket Checker
The HI-761-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Ultra Low Range Checker® HC. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-761-25 reagent to the sample, the reaction will take place and the HI-761 will determine the concentration from the colour that is produced. The results will be displayed in ppb of total chlorine. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppb total chlorine.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Spare Reagent 25 tests Nitrite LR
£23.90
£23.95
Spare Reagent 25 tests Nitrite LR
Spare Reagent 25 tests Nitrite LR
This reagent is for use with the HI-707 nitrite low range pocket checker and provides enough for 25 tests.
The HI-707-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Nitrite Low Range Checker® HC. These reagents follow the Diazotization Method in which the reaction between nitrite and reagent causes a pink tint in the sample. By simply adding the packet of HI-707-25 reagent to the sample, the reaction will take place and the HI-707 will determine the concentration from the colour that is produced. The results will be displayed in ppb of nitrite. These reagents are designed to be used with samples that have an expected range of 0 to 600 ppb nitrite.
Reagents for HI 761 Total Chlorine, ultra-low range pocket Checker
The HI-761-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Ultra Low Range Checker® HC. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-761-25 reagent to the sample, the reaction will take place and the HI-761 will determine the concentration from the colour that is produced. The results will be displayed in ppb of total chlorine. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppb total chlorine.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Spare Reagent 25 tests Total Chlorine ULR
£37.90
£37.95
Spare Reagent 25 tests Total Chlorine ULR
The HI-761-25 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Total Chlorine Ultra Low Range Checker® HC. These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of HI-761-25 reagent to the sample, the reaction will take place and the HI-761 will determine the concentration from the colour that is produced. The results will be displayed in ppb of total chlorine. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppb total chlorine.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Spare Reagent 25 tests Free Chlorine
£10.40
£10.45
Spare Reagent 25 tests Free Chlorine
The 25 pack of reagents is for use with the Free Chlorine Pocket Checker.
These reagents follow the DPD Method in which the reaction between chlorine and reagent causes a pink tint in the sample. By simply adding the packet of reagent, the reaction will take place and will determine the concentration from the colour that is produced. The results will be displayed in ppm (mg/L) of free chlorine. These reagents are designed to be used with samples that have an expected range of 0.00 to 2.50 ppm free chlorine.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Chlorine remover reagent for Alkalinity Colorimeter
£34.90
£34.95
Chlorine remover reagent for Alkalinity Colorimeter
The chlorine remover reagent used to remove chlorine interference when performing a colorimetric determination for freshwater alkalinity with the Freshwater Alkalinity Colorimeter – Checker® HC.
- Pre-made reagent for ease of use
- Prepared with high purity chemicals
- Marked with expiry date and lot number for traceability
Spare Reagent 25 tests Freshwater Alkalinity
£29.90
£29.99
Spare Reagent 25 tests Freshwater Alkalinity
Reagent for Freshwater Alkalinity Checker
The HI-775-26 are high-quality reagents that are pre-measured, allowing for users to achieve fast and accurate measurements with their Freshwater Alkalinity Checker® HC. These reagents follow the Colorimetric Method in which the reaction causes a distinctive range of colours from yellow to green to blue to develop. By simply adding one drop of the Chlorine Remover to remove the chlorine interference, and subsequently adding 1 mL of the Alkalinity Reagent to the sample, the reaction will take place and the HI-775 will determine the concentration from the colour that is produced. The results will be displayed in ppm of CaCO3. These reagents are designed to be used with samples that have an expected range of 0 to 500 ppm CaCO3.
Tip for an accurate measurement
It is important that the sample does not contain any debris.
Whenever the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette.
Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Ammonia LR Calibration Check Set
£24.90
£25.00
Ammonia Calibration Check Set
Ammonia Checker calibration check set (0.00 and 1.00 ppm Ammonia)
An high-quality set of calibration standards that allow for users to validate the Ammonia Low Range Checker. includes one sealed cuvette for zero ppm ammonia and one cuvette that is tinted to an equivalent 1.50 +/- 0.10 ppm ammonia sample @ 25°C. The calibration check set is produced in our state-of-the-art manufacturing facility using reagent grade chemicals in a temperature controlled environment.
Package | cuvette | |
Quantity | One set | |
Certificate of Analysis | Yes |
Nitrite LR Calibration Check Set
£24.90
£25.00
Nitrite LR Calibration Check Set
Nitrite LR Checker (0-999ppb) Calibration Standard
Hanna optional Checker HC Calibration Sets provide a simple solution to validating your Checker HC. Each high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The certificate of analysis provides the lot number, reference values and expiry date to provide traceability when certifying the Checker HC.
The item includes one sealed cuvette for zero ppb nitrite and one cuvette that is tinted to an equivalent 100 +/- 10 ppb nitrite sample @ 25°C. The calibration check set is produced using reagent grade chemicals in a temperature controlled environment.
Package | cuvette | |
Quantity | One set | |
Certificate of Analysis | Yes |
Total Chlorine Calibration Check Set
£19.90
£22.02
Total Chlorine Calibration Check Set
Total Chlorine Calibration Check Set is a high-quality set of calibration standards that allows users to validate the Total Chlorine Checker. Includes one sealed cuvette for zero ppm total chlorine and one cuvette that is tinted to an equivalent 1.00 +/- 0.05 ppm total chlorine sample @ 25°C. The calibration check set is produced using reagent grade chemicals in a temperature controlled environment.
Hanna optional Checker HC Calibration Sets provide a simple solution to validating your Checker HC. Each high quality set of standards is manufactured in our state-of-the-art facility and comes supplied with a Certificate of Analysis. The certificate of Analysis provides the lot number, reference values and expiry date to provide traceability when certifying the Checker HC.
Package | cuvette | |
Quantity | One set | |
Certificate of Analysis | Yes |
Free Chlorine Calibration Check Set
£19.90
£22.02
Free Chlorine Calibration Check Set
The Free Chlorine Calibration Check Set is a calibration checking set for the HI-701 free chlorine Checker.
Free Chlorine Calibration Check Set is a high-quality set of calibration standards that allows users to validate the Free Chlorine Checker includes one sealed cuvette for zero ppm free chlorine and one cuvette that is tinted to an equivalent 1.00 +/- 0.05 ppm free chlorine sample @ 25°C.
Package | cuvette | |
Quantity | One set | |
Certificate of Analysis | Yes |
Freshwater Alkalinity Calibration Set
£32.90
£33.00
Freshwater Alkalinity Calibration Set
The Freshwater Alkalinity Checker Calibration Check Set provides a simple solution to validating the Freshwater Alkalinity Checker that has a range of 0 to 500 ppm CaCO3. This high-quality set of standards comes supplied with a Certificate of Analysis. The Certificate of Analysis provides the lot number, reference values and expiry date for traceability when certifying the Checker.
Package | cuvette | |
Quantity | One set | |
Certificate of Analysis | Yes |
Med Water Purifier
£229.90
£235.00
Med Water Purifier
Water purifiers can play a major role in removing unwanted toxins leaving good water quality
in the pond and helping to keep your fish health
Medium 37 Litre capacity (300 litres per hour) 39" high x 8" Diameter
2.5Ltr PURE+ Filter Start Gel
£41.40
£41.99
PURE+ Filter Start Gel
PURE+ Filter Start Gel is a live, concentrated bacteria culture for use in new pond filters. The gel based solution will stick to the filter media, allowing the nitrifying bacteria it contains to rapidly colonise your filter. Once the filter media has been coated with the PURE+ Filter Start Gel, the beneficial bacteria within the gel will speed up the maturation of your filter media, while helping to convert ammonia and nitrite, resulting in less stressed fish. Available in 2 sizes: 1 Litre treats ponds up to 10,000 litres, 2.5 Litre treats ponds up to 25,000 litres
1Ltr PURE+ Filter Start Gel
£21.40
£21.99
PURE+ Filter Start Gel
PURE+ Filter Start Gel is a live, concentrated bacteria culture for use in new pond filters. The gel based solution will stick to the filter media, allowing the nitrifying bacteria it contains to rapidly colonise your filter. Once the filter media has been coated with the PURE+ Filter Start Gel, the beneficial bacteria within the gel will speed up the maturation of your filter media, while helping to convert ammonia and nitrite, resulting in less stressed fish. Available in 2 sizes: 1 Litre treats ponds up to 10,000 litres, 2.5 Litre treats ponds up to 25,000 litres
Pure Pond Bomb
£15.40
£15.99
Pure Pond Bomb
Pure Pond Bomb
With over 8,000,000,000 bacteria per litre of pure pond balls, your pond will shine even more than normal, especially if you add them monthly into the K1 Media moving bed, or into any other type of fliter you may have!
How to use your Pure Pond Bomb:
For the best results simply 'drop the bomb' into your pond filter or your water directly!
The pure pond bomb can also be used when starting up a new filter, as the high concentration of bacteria will help to remove the harmful ammonia and nitrite, allowing the filter media to mature. Add the pond bomb into the biological stage of your filter!
1000ml Pure Pond Balls
£19.40
£19.99
1000ml Pure Pond Balls
1000ml Slow Releasing Bacteria Balls
With over 8,000,000,000 bacteria per litre of pure pond balls, your pond will shine even more than normal, especially if you add them monthly into the K1 Media moving bed, or into any other type of filter you may have!
500ml Pure Pond Balls
£12.40
£12.99
500ml Pure Pond Balls
500ml Slow Releasing Bacteria Balls
With over 8,000,000,000 bacteria per litre of pure pond balls, your pond will shine even more than normal, especially if you add them monthly into the K1 Media moving bed, or into any other type of filter you may have!
Kusuri Ulcer Treatment Kit
£41.50
£69.99
Kusuri Ulcer Treatment Kit (8 Piece)
-
As seen In The Koi Chronicles Video's & Includes:
- 1 x 150ml of Kusuri Masuizai Koi Sedate
- 1 x 100ml Kusuri Roccal Wound Cleaner
- 1 x 100ml Kusuri Anti-Bac
- 1 x 100ml Spare bottle
- 1 x 25gms of Kusuri Orahesive Sealer Powder
- 1 x 50ml Kusuri Top Coat Sealer
- 1 pair of surgical gloves
- 10 x cotton bud applicators
- Comprehensive step by step instructions
-
Stage two:
Dry wound area with a swab or cotton bud. If there are any very loose or dead scales remove them. Add Roccal Wound Cleaner on to the wound site to clean the treatment area, using a cotton bud. Dry off again. Avoid contact with eyes and gills. Wipe area clean and apply the penetrating Anti Bac solution on the wound (DO NOT DRY OFF). Then immediately sprinkle Orahesive Powder liberally on to treatment area, blow off excess powder. Allow powder to absorb into the wound (about 20-30 seconds). The powder can be lightly wetted again with the Anti Bac and more powder applied to make a double layer of protective powder, and then finally apply Top Coat Sealer solution over powder and surrounding area. Allow sealer to dry off for at least 50 -60 seconds. That‚‚¾‚s it!
Stage three:
Return fish to pond. Avoid touching treatment area; hold fish in water near an air source venturi or air stone. If possible move fish back and forth to make gills move. It is possible to put a finger in the mouth of the fish to make the fish ‚‚¦gulp‚‚½ this can help resuscitation. Release fish when it can swim away unaided.
Follow up:
Hopefully this procedure will not have to be repeated. Though the procedure can be repeated if required, sedating fish is stressful and should be kept to a minimum. Keep a close eye on the wound, the dressing should last 3 To 5 days, after that, just apply the Anti Bac solution by bowling the fish then holding the wound site above the waterline. Once a week is adequate until a sign of new skin growth is evident, i.e. area goes white around the edges of the wound or the wound becomes light pink in colour as new tissue is being generated.
Remember any chemical is a dangerous substance! Always wear surgical gloves when handling medications. Please read fully the statutory health and safety statements on each bottle.
Spray bottles are supplied uncharged, 4-5 pumps maybe required before spray appears.
Kusuri 8-Piece Topical Treatment Kit for Koi. A complete easy to use kit, for the beginner and experienced fish keeper. For treating Ulcers, wounds and Fin Rot.
General pond medications may solve parasitic infestations but are seldom effective against physical Ulcers, wounds, Fin Rot. Treating the fish topically will be more effective and potentially life saving!
Treating wounds on fish can be just as stressful for the owner as much as the fish! There can be nothing more upsetting than an ulcer on a Koi. This kit is designed to give you a pretty good chance at repairing the damage! One or two questions you must ask yourself, is this an isolated "one off" wound or ulcer? Do other Koi show signs of ulcers? if so please, be quite sure your water quality is good. Most ulcers that break out , and fail to heal naturally, are normally a result of an underlying water quality issue. Poor water quality will severely delay any healing process especially if Ammonia or Nitrite are high.
The secret to successful treatment is to catch the problem early and do something about it. Only in exceptional circumstances will a Koi have the ability to heal without treatment. It is quite common to do extra treatment as necessary. The Kusuri Topical Treatment Kit can be used at any temperature at any time of the year, though it must be pointed out the Koi will heal quicker if the water temperature is above 15°C.
All kit components are replaceable, so you need never run short of any particular item. If there is one thing you should keep at home for your Koi this is it! This kit contains chemicals and should be stored away from children & pets.
Please ensure that you read, understand and follow, all Health and Safety guidelines on the bottle.
Please do not eat, drink or smoke whilst handling chemicals.
How to Use:
Kusuri 8-Piece Topical Treatment Kit for Koi
There can be nothing more upsetting than ulceration on a fish. This kit is designed to give you a pretty good chance of repairing the damage. Before I go on to describe the treatment plan, one or two questions you must ask yourself; is this an isolated ‚‚¦one off‚‚½ wound or ulcer? Do other fish show signs of ulcers? If so please, please, please, be quite sure your water quality is good. Most ulcers that ‚‚¦break out‚‚½ on Koi and goldfish, (that have been previously o.k.) are normally a result of an underlying water quality issue. Poor water quality will only delay any healing process, especially if Ammonia is high.
The secret to successful treatment is to catch the problem early and do something about it. Only in exceptional circumstances will a fish have the ability to heal without treatment. Also a certain amount of persistence is required. It is quite common for the need to repeat the treatment. This topical treatment kit can be used at any temperature any time of the year, though it must be pointed out the fish will heal quicker if the water temperature is 70°F + (21°C +). Do not be put off if you cannot achieve that temperature at the time of treatment, keeping the wound clean and free of bacteria at any temperature is very beneficial.
The main problem faced when trying to heal a wound etc, is the ever present pathogenic bacteria in the pond and on the wound itself. It is beneficial to lower bacterial levels in the pond at the time of treatment, especially when the water is above 65°F (18°C) this can be achieved by adding Chloramine T or Acriflavine to the pond, or through non chemical beneficial products like Kusuri Pro-100 will not damage water quality or lower filter activity.
Stage one:
Prepare everything before you start! Firstly read through these instructions. If the wound is in an awkward location and the fish is above 6 inches, then it maybe best to sedate the fish. To sedate a fish take a bowl / plastic bag and add pond water just enough to cover the fish. Work out the volume of water that has been put in the bowl, and then add Masuzai Koi Sedate, at the rate of 10 mls to 2 gallons. Shake the bottle well before use. Agitate water to mix solution fully. Put fish in bowl and watch carefully, when the fish has "gone over" or can be lifted above the water for 20 seconds without "kicking or twisting" the fish is ready for treatment.
Depending on fish size, temperature, general health, and gill efficiency it maybe necessary to add more Masuzai, add at the same rate to the same solution if the fish is not fully sedated after 2 minutes. This is common do not panic!
Remember at any stage during treatment return the fish to the pond if you are in anyway concerned that all is not going well! Then follow stage 3.
Soak a tea towel or similar with pond water. When the fish is sedated, place on the damp tea towel and cover the fish so only the treatment area is visible.
Vetark Tamodine Wound Dressing
£11.90
£13.50
Vetark Tamodine Wound Dressing 100ml
- Wound and skin cleanser
- Powerful antifungal and antibacterial tamed iodine
- Ideal for cleansing wounds and washing infected areas
Directions:
Apply tamodine using cotton wool or cotton buds and clean carefully. Rinse thoroughly.
Potassium Permanganate
£9.99
£11.99
Potassium Permanganate
Kusuri Potassium Permanganate is another popular powdered chemical for various applications. A good disinfectant for ponds and nets. Excellent for the eradication of Trichodina & Costia, and other parasites. It will discolour water for up to 7 days, and can be used down to 10°C (50°F). At higher temperatures Potassium Permanganate removes oxygen from pond water, it is advisable to keep an air stone running and add more air if possible. Hydrogen Peroxide 6% Solution can be used to increase the oxygen levels in pond water and also remove the discolouration from the pond water after a course of Kusuri Potassium Permanganate has oxidized from pink to brown. Kusuri recommend NOT using Potassium Permanganate with salt.
Chloramine T
£15.90
£16.50
Chloramine T
Kusuri Chloramine T can be used for the treatment against Gill Flukes, Body Flukes, White Spot, Costia and bacterial Gill Disease, as well as the reduction of pathogenic bacterial levels.
Do not use below 12.5°C (54.5°F).
Please ensure that you read, understand and follow all Health and Safety guidelines on the packet.
Please do not eat, drink or smoke whilst handling chemicals.
Wear disposable vinyl or latex gloves and appropriate eye protection.
Caution: Please check your pH and KH prior to using as Chloramine T can be very toxic in soft water. If your pH is below pH7 (acid) and has a general hardness below 6°dH (soft water) reduce the dose by 75%. NOT safe to use with salt.
Dosage: 5g per 1000 gallons (4564 Litres) of pond water. Dosage to reduce pathogenic bacterial levels in pond water. Repeat after 24 hours for a maximum of 5 days.
Dosage: 15g per 1000 gallons (4564 Litres) of pond water. Dosage to reduce parasite levels in pond water. Repeat after 24 hours for a maximum of 4 days. This treatment regime can be repeated after 14 days if necessary.
Switch off UV steriliser until course of treatment is complete.
Do not use below 12.5°C (54.5°F).
Directions: Fill a clean watering can with pond water, then add Kusuri Chloramine T.
Slowly apply to the pond over a 1 hour period, this will prevent shocking the pond with a highly concentrated dose.
Hydrogen Peroxide
£8.90
£9.99
Hydrogen Peroxide
Kusuri Hydrogen Peroxide 6% Solution is used for the re-oxygenation of pond water after a treatment of Kusuri Potassium Permanganate.Kusuri Hydrogen Peroxide 6% Solution can be used to increase the oxygen levels and remove the discolouration from pond water after a course of Kusuri Potassium Permanganate has oxidized from pink to brown.Kusuri Hydrogen Peroxide 6%Solution can also be very useful when applied to pond water prior to the removal of sludge and detritus. The hydrogen peroxide will neutralize hydrogen sulphide realised from the sludge and detritus being removed.
Dosage 25ml per 220 gallons (1000 Litres) of pond water.
Fill a clean watering can with pond water, then add correct dose of Kusuri Hydrogen Peroxide.
Slowly apply to the pond over a 1 hour period, this will prevent shocking the pond with a highly concentrated dose.
Do not use below 10°C (50°F).
Malachite Green
£16.90
£17.50
Malachite Green
Kusuri Malachite Green is best used with Kusuri Formalin 30% for the effective treatment of most single cell parasites including White Spot, Costia, Chilodonella, Oodinium, persistent Fungus caused by Saprolengia and Protozoan Parasites.
Do not use below 12.5°C (54.5°F).
Mixing Formalin and Malachite Green is an effective way of treating most microscopic parasites.
Please ensure that you read, understand and follow all Health and Safety guidelines on the bottle.
Please do not eat, drink or smoke whilst handling chemicals.
Wear disposable vinyl or latex gloves and appropriate eye protection.
Dosage: 50 ml per 880 gallons (4004 litres) of pond water.
Directions: Treat up to 3 times, 5-7 days apart. Switch off UV steriliser until course of treatment is complete.
If using in conjunction with Kusuri 30% Formalin, reduce dose to 25 ml per 880 gallons (4004 litres).
Fill a clean watering can with pond water, then add Kusuri Malachite Green.
Slowly apply to the pond over a 1 hour period, this will prevent shocking the pond with a highly concentrated dose.
Do not use below 12.5°C (54.5°F).
Malachite Green is safe to use with salt. If using Malachite Green with Formalin do NOT use in conjunction with salt.
Formalin 30%
£15.99
£18.99
Formalin 30%
Kusuri Formalin 30% is best used with Kusuri Malachite Green for the effective treatment of most single cell parasites including White Spot, Costia, Chilodonella, Oodinium and Protozoan Parasites. Use above 12.5°C (54.5°F) Kusuri do not recommend the use of Formalin with any salt solution. Please ensure that you read, understand and follow all Health and Safety guidelines on the bottle. Please do not eat, drink or smoke whilst handling chemicals. Wear disposable vinyl or latex gloves and appropriate eye protection.
Dosage: 75mls per 1000 gallons (4546 Litres) of pond water.
For use above 12.5°C (54.5°F)
Directions: The normal course is 3 treatments, 5-7 days apart. Switch off UV steriliser until course of treatment is complete. Formalin is a very active chemical and is best used with Kusuri Malachite Green for the effective treatment of most single cell parasites, including white spot, costia and some fluke infestations.
Slowly apply to the pond over a 1 hour period; this will prevent shocking the pond with a highly concentrated dose.
Formalin is highly toxic and a carcinogen chemical, please ensure you read, understand and follow, all safety guidelines included with this product.
Do not use Malachite and Formalin in conjunction with salt.
Acriflavine
£16.99
£19.99
Acriflavine
Kusuri Acriflavine 1% is a liquid medication used as a treatment against bacterial infections including Ulcers, Protozoal and External Fungal Infections such as Fin and Mouth Rot.
Kusuri Acriflavine 1% is reported to help in the reduction of minor viral infections. It can be used safely in salted ponds.
Do not use below 12.5°C (54.5°F)
Please ensure that you read, understand and follow, all Health and Safety guidelines on the bottle.
Please do not eat, drink or smoke whilst handling chemicals.
Wear disposable vinyl or latex gloves and appropriate eye protection.
Dosage: 10mls to 100 gallons (456 Litres) of pond water.
Do not use below 12.5°C (54.5°F).
Directions: Repeat dose every 3 days for a maximum of 10 doses. Switch off UV steriliser until course of treatment is complete.
Fill a clean watering can with pond water, then add Kusuri 1% Acriflavine.
Slowly apply to the pond over a 1 hour period, this will prevent shocking the pond with a highly concentrated dose.
Kusuri Acriflavine 1% is safe to use with salt.
Koi Sedate
£7.90
£8.99
Koi Sedate
Kusuri Masuizai Koi Sedate is used for the sedation of fish, reducing fish stress levels and calming fish so minor surgical procedures or mucus scrapes can be taken to identify parasites.
This gentle sedation formula is safe to use and does not contain harmful Acetone.
Kusuri recommend that you store this product above 13oC. Below this temperature the product will solidify, do not allow to freeze.
Use 10ml per 9 litres of pond water.
Fill a suitable bowl with enough water to cover the fish. Add measured dosage of Koi Sedate, and aerate with an air stone. Place fish in bowl until it rolls onto its side (normally 2-3 minutes).
For euthanasia add times the recommended dose. Do NOT use with salt.
Do not use below 15°C.
Available in 150ml and 250 ml bottles.
Recovery
£16.99
£19.99
Kusuri Recovery
Recovery is a post trauma
treatment with added Aloe Vera
which aids in reducing fish stress
and helps by adding a protective
slime coat. Recovery is best used
when adding new fish, after treating with a medication, when performing a water change or to aid in the
healing of wounds and ulcers. Recovery instantly removes Chlorine and Chloramines, detoxifies heavy
metals from source water with natural Aloe Vera aiding the recovery of fish post trauma situations.
AquaForte 60cm Pan Net
£76.90
£78.20
AquaForte 60cm Pan Net
Very compact size koi net. Net can be screwed to the telescopic handle. Black anodized aluminium handle is
adjustable from 1,65 to 2,9 meter. Net is fitted inside aluminium ring which prevents it from damaging.
AquaForte 80cm Pan Net
£82.90
£84.20
AquaForte 80cm Pan Net
Very compact size koi net. Net can be screwed to the telescopic handle. Black anodized aluminium handle is
adjustable from 1,65 to 2,9 meter. Net is fitted inside aluminium ring which prevents it from damaging.
AquaForte 100cm Pan Net
£84.90
£88.20
AquaForte 100cm Pan Net
Very compact size koi net. Net can be screwed to the telescopic handle. Black anodized aluminium handle is
adjustable from 1,65 to 2,9 meter. Net is fitted inside aluminium ring which prevents it from damaging.
11" Watertight Sock Net
£45.00
£52.00
11" Watertight Sock Net
Koi socks are designed to carry a koi from the pond to a inspection bowl or tank without causing harm or stress to the fish. The watertight sock means the water remains in the sock and is very useful for quickly filling up or emptying an inspection bowl.
11" Sock Net
£28.00
£29.00
11" Sock Net
Koi socks are designed to carry a koi from the pond to a inspection bowl or tank without causing harm or stress to the fish.
Medic Mat
£19.00
£22.00
Medic Mat
Medic mat as seen in our video's brilliant for resting your koi onto under treatment.
Size
Folded 30cm x 25cm
Open 30 cm x 75 cm
Spawning Brushes
£19.99
£23.99
Spawning Brushes
Why do i need
2 brushes, each 59" x 5.5" (1500mm x 140mm) diameter. If you have mature koi of each gender, they will be ready to spawn at any time from April to August. The earliest they will spawn is temperature and daylight dependent and so a warm spring will bring the season forward and cold weather will delay it. Koi look for somewhere suitable to lay their eggs. In nature this will be plants, roots and filamentous algae. Since most domestic koi ponds are devoid or short of these, either the koi will not spawn at all or they will try to spawn on the walls of the pond. The very act of spawning is extremely energetic and so the fish are at risk of damaging themselves on the hard edges of the pond if they have nothing more suitable on which to spawn. Spawning brushes are ideal particularly when breeding your koi have no natural plant life to spawn on. Our koi spawning brushes are particularly important for ponds that do not have water hyacinths and other plant life that are essential to your koi‚‚¾‚s reproduction. Each Black Knight spawning brush is approximately 59 inches (159cm) long with a diameter of 5.5 inches (14cm). They are lighter, more compact alternatives to koi spawning mats and mops. Unlike other spawning products, our koi spawning brushes are extremely easy to use. Black Knight spawning brushes are designed to be harmless to the fish (they are soft and smooth) and to emulate plants. Simply placing the brushes appropriately in the pond will provide a focal point for the fish that is out of harm‚‚¾‚s way and will dramatically reduce the chances that the fish will injure themselves on the side of the pond.
How do they work
Our spawning brushes need no preparation before use. They can be suspended on the pond in the most suitable position to encourage the fish to spawn on them. When the mature female is ready, she will give off pheromones which will trigger activity amongst the males. You will probably first notice something happening during the evening. Perhaps two to four males will start showing a greater interest in the female and will start following her more closely. This will be relatively low-key activity for several hours. Koi always start spawning early in the morning and the process can take several hours. It starts with an escalation in activity and the males will be harrying the female and almost pushing her around. As soon as she is ready, she will be ready to release her eggs and the process will begin. Cyprinids (members of the carp family) do not lay their eggs all in one go and in one place. The female will shoot forwards at high speed across the spawning brushes and squirt a few eggs each time onto them. The eggs are coated in a sticky substance that makes the eggs adhere to the brushes. During each bombing run (when you see it, you will understand why we are describing it in this way), the males will follow immediately behind the female and will spray their milt over the eggs to fertilise them. This process will be repeated many times. A small female may do it 40 times and a very large one may do it 150 times. The eggs will remain stuck to the brushes although you may not be able to see them. You can lift the brushes out of the water briefly to have a look. They are translucent and look like tiny spheres of jelly. You can leave the brushes in the pond if you wish for incubation and hatching. If you want to maximize the number of fry that hatch then it is better to remove the brushes to another oxygenated and filtered tank or pond away from the other fish. Mature fish will eat many eggs and fry if you let nature take its course in the pond. If you wish to move the fish, ensure that you equalize water temperatures first because a temperature shock will reduce the success rate. Fertilised eggs will show a couple of black spots (the eyes) after two or three days. All unviable eggs will turn white in a day or two. The dead eggs will attract fungus which can be minimized by adding some malachite green to the water. In high temperatures, the eggs can hatch in about 3 ½ days and in up to 8 days in cool temperatures. Typically, a period around 5 days is average and this should be achieved at around 18 ‚‚ 21 deg C. The fry will hatch and then stick to any nearby object and wait there for a further day while they digest the remainder of their yolk sac. When the yolk runs out they will swim to the surface to take a gulp of air to inflate their swimbladder for the first time. From this point on they are free swimming and will be looking for food. A few hours after the fry start to hatch, you should remove the brushes so that the remaining dead eggs do not pollute the water. Koi fry can be difficult to feed artificially for the first two weeks. In nature they would feed on zooplankton. These are tiny animals that live in suspension in the water (such as daphnia) and are an ideal first meal for the fry. You can make your own zooplankton by hatching brine shrimp. You can buy freeze-dried brine shrimp eggs; you place them in oxygenated warm salt water and they hatch in 1 day. It is quite a simple process and is ideal for feeding the small fry. You can buy dry fry food from your local aquarist. This is fine for fry that are a week old but it is a little tricky to get newly hatched fry to start on it. One very important point is to monitor the water quality of your hatching tanks. It is essential that you have good mechanical and biological filtration if you are to raise your young fish successfully.
How to use
Place the brushes below the water level, one above the other slightly away from the edge of the pond. You can secure them in position by tying strings to the loops at the ends of the brushes. When you put the brushes in the water for the first time they will try to float. This is because of microbubbles sticking to the brush filaments. Give the brushes a little shake under water; this will release the bubbles and the brushes will settle at the right height just below the surface.
Maintenance
When you have finished using the brushes, hose them down until they are clean. When the brushes are dry you can store them for re-use next season.
XL Pro 2-Layer Softshell Jacket
£44.99
£49.99
Koi Chronicles Pro 2-Layer Softshell Jacket
Size XL 44"
Koi Chronicles Pro 2-Layer Softshell Jacket
Ideal for keeping warm outdoors, the softshell jacket doubles up as smart pondwear and casual wear. It features front zip fastening and handy front zipped hand pockets, making it light enough to keep you mobile, but heavy during the cooler weather.
Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
XL Pro 2-Layer Softshell Gilet
£32.99
£35.99
Koi Chronicles Pro 2-Layer Softshell Gilet
Size XL 48"
Koi Chronicles Pro 2-Layer Softshell Gilet
Is an extra layer for keeping warm pondside, the softshell gilet features full-front zip fastening and handy front zipped hand pockets. The shell of the gilet will keep you warm and dry due to the windproof and showerproof properties. Not to mention that you won't get your sleeves wet!! Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
XL Pro Hoodie
£32.99
£34.99
Koi Chronicles Pro Hoodie
Size XL 48"
Koi Chronicles Pro Hoodie is a comfortable classic. It's an essential addition to your pondwear offerings. Cut in a modern and comfortable fit, with twin-needle stitching for extra durability, the slip on style has a drawcord hood and front kangaroo pocket.Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
XL Pro Sweatshirt
£29.99
£32.99
Koi Chronicles Sweatshirt
Size XL 48"
The Koi Chronicles Pro Sweatshirt will keep you warm and comfortable, ideal for any pond working environment. Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
XL Pro Joggers
£29.99
£32.99
Koi Chronicles Grey Joggers
Size L W36" L34
Koi Chronicles grey pro joggers. Modern tapered slim fit and ribbed cuffs. Front pockets. Elasticated waistband with outer drawcords. Long Legged and great quality with embroidered Koi Chronicles logo on the the bottom of left leg @KOICHRONICLES
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
XL Pro Polo T-Shirt
£26.99
£29.99
Koi Chronicles White Polo T-Shirt
Size XL 48"
Koi Chronicles White Pro Polo T-Shirt. Complete with twin-needle stitching for extra durability whilst offering an all-day comfortable fit.This polo is ideal to create the perfect pondwear garment in the summer! Great quality with embroidered Koi Chronicles logo on the breast, #KOICHRONICLES on the arm and @KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
XL Pro T-Shirt
£19.90
£21.90
Koi Chronicles White T-Shirt
Size XL 48"
Koi Chronicles White Pro T-Shirt, offering an all-day comfortable fit.This T Shirt is ideal to create the perfect pondwear garment in the summer! Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro 2-Layer Softshell Jacket
£44.99
£49.99
Koi Chronicles Pro 2-Layer Softshell Jacket
Size L 44"
Koi Chronicles Pro 2-Layer Softshell Jacket
Ideal for keeping warm outdoors, the softshell jacket doubles up as smart pondwear and casual wear. It features front zip fastening and handy front zipped hand pockets, making it light enough to keep you mobile, but heavy during the cooler weather.
Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro 2-Layer Softshell Gilet
£32.99
£35.99
Koi Chronicles Pro 2-Layer Softshell Gilet
Size L 44"
Koi Chronicles Pro 2-Layer Softshell Gilet
Is an extra layer for keeping warm pondside, the softshell gilet features full-front zip fastening and handy front zipped hand pockets. The shell of the gilet will keep you warm and dry due to the windproof and showerproof properties. Not to mention that you won't get your sleeves wet!! Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro Hoodie
£32.99
£34.99
Koi Chronicles Pro Hoodie
Size L 44"
Koi Chronicles Pro Hoodie is a comfortable classic. It's an essential addition to your pondwear offerings. Cut in a modern and comfortable fit, with twin-needle stitching for extra durability, the slip on style has a drawcord hood and front kangaroo pocket.Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro Sweatshirt
£29.99
£32.99
Koi Chronicles Sweatshirt
Size L 44"
The Koi Chronicles Pro Sweatshirt will keep you warm and comfortable, ideal for any pond working environment. Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro Joggers
£29.99
£32.99
Koi Chronicles Grey Joggers
Size L W34" L34
Koi Chronicles grey pro joggers. Modern tapered slim fit and ribbed cuffs. Front pockets. Elasticated waistband with outer drawcords. Long Legged and great quality with embroidered Koi Chronicles logo on the the bottom of left leg @KOICHRONICLES
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro Polo T-Shirt
£26.99
£29.99
Koi Chronicles White Polo T-Shirt
Size L 41/42"
Koi Chronicles White Pro Polo T-Shirt. Complete with twin-needle stitching for extra durability whilst offering an all-day comfortable fit.This polo is ideal to create the perfect pondwear garment in the summer! Great quality with embroidered Koi Chronicles logo on the breast, #KOICHRONICLES on the arm and @KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
L Pro T-Shirt
£19.90
£21.90
Koi Chronicles White T-Shirt
Size L 41/42"
Koi Chronicles White Pro T-Shirt, offering an all-day comfortable fit.This T Shirt is ideal to create the perfect pondwear garment in the summer! Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro 2-Layer Softshell Jacket
£44.99
£49.99
Koi Chronicles Pro 2-Layer Softshell Jacket
Size M 40"
Koi Chronicles Pro 2-Layer Softshell Jacket
Ideal for keeping warm outdoors, the softshell jacket doubles up as smart pondwear and casual wear. It features front zip fastening and handy front zipped hand pockets, making it light enough to keep you mobile, but heavy during the cooler weather.
Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro 2-Layer Softshell Gilet
£32.99
£35.99
Koi Chronicles Pro 2-Layer Softshell Gilet
Size M 40"
Koi Chronicles Pro 2-Layer Softshell Gilet
Is an extra layer for keeping warm pondside, the softshell gilet features full-front zip fastening and handy front zipped hand pockets. The shell of the gilet will keep you warm and dry due to the windproof and showerproof properties. Not to mention that you won't get your sleeves wet!! Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro Hoodie
£32.99
£34.99
Koi Chronicles Pro Hoodie
Size M 40"
Koi Chronicles Pro Hoodie is a comfortable classic. It's an essential addition to your pondwear offerings. Cut in a modern and comfortable fit, with twin-needle stitching for extra durability, the slip on style has a drawcord hood and front kangaroo pocket.Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro Sweatshirt
£29.99
£32.99
Koi Chronicles Sweatshirt
Size M 40"
The Koi Chronicles Pro Sweatshirt will keep you warm and comfortable, ideal for any pond working environment. Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro Joggers
£29.99
£32.99
Koi Chronicles Grey Joggers
Size M W32" L33"
Koi Chronicles grey pro joggers. Modern tapered slim fit and ribbed cuffs. Front pockets. Elasticated waistband with outer drawcords. Long Legged and great quality with embroidered Koi Chronicles logo on the the bottom of left leg @KOICHRONICLES
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro Polo T-Shirt
£26.99
£29.99
Koi Chronicles White Polo T-Shirt
Size M 40"
Koi Chronicles White Pro Polo T-Shirt. Complete with twin-needle stitching for extra durability whilst offering an all-day comfortable fit.This polo is ideal to create the perfect pondwear garment in the summer! Great quality with embroidered Koi Chronicles logo on the breast, #KOICHRONICLES on the arm and @KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
M Pro T-Shirt
£19.90
£21.90
Koi Chronicles White T-Shirt
Size M 40"
Koi Chronicles White Pro T-Shirt, offering an all-day comfortable fit.This T Shirt is ideal to create the perfect pondwear garment in the summer! Great quality with embroidered Koi Chronicles logo on the breast, @KOICHRONICLES on the arm and #KOICHRONICLES on the back of neck.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
Men's Beanie Hat
£12.50
£15.00
Koi Chronicles Grey Beanie Hat
One size fit all Mens Koi Chronicles beanie hat. Great quality with embroidered Koi Chronicles logo.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
"What our clients say"
Steve Thirkell "Top Quality Love It"
Ladies Beanie
£12.50
£15.00
Koi Chronicles Blush Beanie Hat
One size fit all Ladies Koi Chronicles beanie hat. Great quality with embroidered Koi Chronicles logo and pompom.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
Baseball Cap
£15.00
£16.50
Koi Chronicles Black Baseball Cap
One size fits all Koi Chronicles base ball cap. Great quality with embroidered Koi Chronicles logo.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
Easy Flaps
£35.00
£39.00
Set Of Easy Flaps
Constantly finding media where it shouldn't be? then the Koi Chronicles easy flaps are for you. Bespoke made from 6mm 30 years (No Yellowing) guaranteed Perspex. Complete with fitting kit and instructions. Best mod available for the Pod Filter. Keep the K1 + media in place.
"What our clients say"
Carol Lycett "The Easy Flaps were very easy to install They keep the media in its place Swift delivery great service. Thank you KC"
Graham Taylor "The easy flaps from Koi Chronicles are one of the simple yet best mods for the eazypod I’ve seen. Since fitting I’ve had no media loss so no more worries when cleaning my pod. Flaps are supplied with the correct size drill bit, cable ties and fitting take no more than 10 minutes. Easy flaps and easy fit for ease of mind. Thanks KC for a great product"
Paul Blundall "I purchased the Easy flap from Paul at KC chronicles because when I clean my Eazypod I like to leave my pump on untill the water is just on the overflows on the Eazypod this in my opinion gives the pod a better clean. After each clean I was loosing my micro k1 into the outer chamber then down the drain it all went. Once I installed the Easyflaps the problem was solved. Not only do they do the job of keeping the media in place you can still get to your media to add Pond balls and to give the media a good mixup with a small brush. They come with easy step by step instructions and everything needed apart from the drill to fit them. I wouldn’t be without them now Thanks again KC"
Mug Design 1/3
£14.50
£15.00
Koi Chronicles 15oZ Mug
Be pond side with your very own Koi Chronicles Mug, Have your favorite brew in the mornings afternoon or evening with this product. This isn't your standard mug this is a 15oZ Koi Chronicles Mug.
Mug Design 2/3
£14.50
£15.00
Koi Chronicles 15oZ Mug
Be pond side with your very own Koi Chronicles Mug, Have your favorite brew in the mornings afternoon or evening with this product. This isn't your standard mug this is a 15oZ Koi Chronicles Mug.
Mug Design 3/3
£14.50
£15.00
Koi Chronicles 15oZ Mug
Be pond side with your very own Koi Chronicles Mug, Have your favorite brew in the mornings afternoon or evening with this product. This isn't your standard mug this is a 15oZ Koi Chronicles Mug.
KC Window Sticker
£3.00
£3.50
Koi Chronicles Window Sticker
Your very own Koi Chronicles window sticker. Stick it on your car, front door or wine frigde you want and smarten up your filtering system size is 90mm x 90mm
KC Fish Measure Sticker 95cm
£11.99
£12.99
Koi Chronicles Blue Bowl Sticker
Your very own Koi Chronicles matt finished blue bowl sticker. Pimp up you blue bowl with this great looking fish measure ruler sticker.
KC Fish Measure Sticker 65cm
£9.99
£10.99
Koi Chronicles Blue Bowl Sticker
Your very own Koi Chronicles matt finished blue bowl sticker. Pimp up you blue bowl with this great looking fish measure ruler sticker.
"What our clients say"
Bryan Watson "Purchased the label a short while ago for my measuring bowl as I wasn't keen on the plain boring white labels. I think it makes my measuring bowl look super cool"
KC Sticker
£2.00
£2.50
Koi Chronicles Glossy Sticker
Your very own Koi Chronicles glossy sticker. Stick it anywhere you want and smarten up your filtering system size is 50mm x 50mm
Key Ring Bottle Opener
£4.50
£5.00
Koi Chronicles Bottle Opener
Koi Chronicles key ring bottle opener, enjoy your favorite tipple on me.
Koi Chronicles Pin Badge
£4.50
£9.00
Pin Badge
@KoiChronicles Pin Badges! The Ultimate Koi Chronicles Accessory.
Get Rewards If You Own A KC #PinBadge #ComingSoon #AreYouReady
Save 50% For A Limited Time Only!
KC Koi Socks
£9.00
£10.99
Koi Chronicles Socks Pair
Koi Chronicles socks this would make the ultimate koi fan a great gift. Birthdays fathers day etc.
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
KC Hand Treatment Towel
£12.50
£12.90
KC Hand Treatment Towel
Koi Chronicles Hand Treatment Towel this would make the ultimate koi fan a great gift for Birthdays Fathers day etc. Or simply have one for around the filter house for spills and leaks. Embroidery Logo
Supply on demand only! This Item will fall short of the delivery process! Please allow 14 business days for delivery. Thanks in advance KC
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi 9KW
£2390.00
£2395.00
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Description
Koi Chronicles are the leading specialist supplier of Koi Pond heat pumps. We have a few years of experience in the market and have used our expertise to research our own preferred range of pond heat pumps.
The New Thermotec Inverter Pro Horizontal range of pond heat pumps really do offer the best in terms of efficiency, performance, reliability and low noise operation.
The New Thermotec Inverter Horizontal range are fully inverter driven. This means that they automatically adjust the speed of the fan and compressor to precisely match the heat demand from the pondl.
The ability to adjust the output of the heat pump allows the New Thermotec Inverter Pro Horizontal to deliver greatly reduced running costs with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is delivered to the pond. This delivers reduced running costs compared with other heat pumps on the market
In addition the inverter technology has a reduced electrical startup requirement, making them ideal for properties with a sensitive or limited electrical supply.
They have larger evaporators (fins) which gives more surface area to extract heat at low air temperatures. This allows the Thermotec Inverter to produce more heat than competitor heat pumps at low air temperatures, making them the best choice for koi ponds and indoor pools which are used all year round. The larger surface area also gives higher efficiency and reduced running costs all year round. Now includes FREE wifi module
Features
- Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output
- High efficiency with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is returned to the pond.
- The desired water temperature can be adjusted in steps of 0.1 °C.
- Equipped with an easy to use 5-inch colour touch screen display / control panel.
- Remote control and monitor your heat pump via an app on your smartphone
- Remote support from HeatPumps4Pools via the wifi module – supplied free of charge with each heat pump
- Top quality Mitsubishi variable speed inverter compressor
- Brushless variable speed DC fan motor – very efficient with extremely quiet operation
- Control panel is lockable to prevent tampering with the pool set temperature (useful for rented properties)
- Display shows temperature & power consumption curves to monitor the performance of the heat pump
- Six different models:9kw, 12kw, 17kw, 19.5kw, 24.2kw, 28 kw and 34kw
- All models single phase power (ie 220v to 240v)
- Suitable for pools, swim spas, hot tubs and koi ponds etc
- Desired water temperature can be set from +10c to +40c
- Soft start with reduced electrical startup requirements for properties with sensitive or limited power supplies
- Low noise, variable speed fan.
- Corrosion resistant case
- Microprocessor controlled
- Fully programmable via the colour touch screen control panel
- Automatic hot gas defrosting.
- Ideal for use on koi ponds – fully programmable temperature accuracy (swing) – down to 0.5c above and below desired water temperature. No external thermostat required.
- No need to purchase a separate external thermostat for accurate temperature control
- Titanium heat exchanger – resistant to corrosion from chlorine or salted ponds.
- Operates in air temperatures as low as -15 °C.
- Capable of heating and cooling, all year round.
- Wifi module – control the heat pump from your smartphone or any web browser
- Built in timer function
- Built in water flow switch
- Includes condensate drain hoses and drain spouts to allow condensation water to be diverted to a flower bed etc.
- Refrigerant gas type – R32 from October 2020, 410a before this date
- 3-Year Parts & Labour Warranty on all parts
Key Benefits of the New Thermotec Inverter Pro Horizontal Range
- The Thermotec Inverter heat pumps have larger size evaporators (fins). This gives them more surface area and allows more heat to be captured from the air. This allows the unit to produce more heat at low air temperatures (down to -15c) than competitor products, making them the best choice for koi ponds and indooor pools which are used all year round.
- Colour touch screen controls – provides easy to use operation and programming of the unit. The colour display shows a graph of the running speed of the unit as well as information such as water inlet and outlet temperatures, ambient air temperature, current water temperature etc
- Programmable temperature accuracy to +/- 0.5c (or down to +/- 0.1c). This makes the Thermotec Inverter ideal for koi ponds or where more accuracy is required over the temperature variance above and below the desired set point. No external thermostat is required.
- Electronic gas pressure sensor – allows the unit to more accurately control the compressor and fan speed resulting in higher efficiency and lower running costs
- Unique wifi platform allows remote support for the product if requried. Our technicians can check all settings and monitor performance of the heat pump remotely to provide you with the highest level of support and the fastest issue resolution.
The sizing guide for koi ponds is:-
For a koi pond that is heated all year round with a winter temperature of around 12c and a summer temperature of around 20-22c, we recommend the following sizing:-
Model |
Max Pond Volume |
---|---|
Thermotec Inverter Horizontal 9kw | 4500 gallons |
Thermotec Inverter Horizontal 12kw | 6000 gallons |
Thermotec Inverter Horizontal 17kw |
7500 gallons |
Thermotec Inverter Horizontal 19.5kw |
9600 gallons |
Thermotec Inverter Horizontal 24kw |
11,600 gallons |
Thermotec Inverter Vertical 29kw |
13,800 gallons |
Thermotec Inverter Vertical 34kw |
19,900 gallons |
Thermotec Inverter Vertical 34kw (3 Phase) | 19,900 gallons |
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi 12KW
£2745.00
£2750.00
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Description
Koi Chronicles are the leading specialist supplier of Koi Pond heat pumps. We have a few years of experience in the market and have used our expertise to research our own preferred range of pond heat pumps.
The New Thermotec Inverter Pro Horizontal range of pond heat pumps really do offer the best in terms of efficiency, performance, reliability and low noise operation.
The New Thermotec Inverter Horizontal range are fully inverter driven. This means that they automatically adjust the speed of the fan and compressor to precisely match the heat demand from the pondl.
The ability to adjust the output of the heat pump allows the New Thermotec Inverter Pro Horizontal to deliver greatly reduced running costs with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is delivered to the pond. This delivers reduced running costs compared with other heat pumps on the market
In addition the inverter technology has a reduced electrical startup requirement, making them ideal for properties with a sensitive or limited electrical supply.
They have larger evaporators (fins) which gives more surface area to extract heat at low air temperatures. This allows the Thermotec Inverter to produce more heat than competitor heat pumps at low air temperatures, making them the best choice for koi ponds and indoor pools which are used all year round. The larger surface area also gives higher efficiency and reduced running costs all year round. Now includes FREE wifi module
Features
- Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output
- High efficiency with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is returned to the pond.
- The desired water temperature can be adjusted in steps of 0.1 °C.
- Equipped with an easy to use 5-inch colour touch screen display / control panel.
- Remote control and monitor your heat pump via an app on your smartphone
- Remote support from HeatPumps4Pools via the wifi module – supplied free of charge with each heat pump
- Top quality Mitsubishi variable speed inverter compressor
- Brushless variable speed DC fan motor – very efficient with extremely quiet operation
- Control panel is lockable to prevent tampering with the pool set temperature (useful for rented properties)
- Display shows temperature & power consumption curves to monitor the performance of the heat pump
- Six different models:9kw, 12kw, 17kw, 19.5kw, 24.2kw, 28 kw and 34kw
- All models single phase power (ie 220v to 240v)
- Suitable for pools, swim spas, hot tubs and koi ponds etc
- Desired water temperature can be set from +10c to +40c
- Soft start with reduced electrical startup requirements for properties with sensitive or limited power supplies
- Low noise, variable speed fan.
- Corrosion resistant case
- Microprocessor controlled
- Fully programmable via the colour touch screen control panel
- Automatic hot gas defrosting.
- Ideal for use on koi ponds – fully programmable temperature accuracy (swing) – down to 0.5c above and below desired water temperature. No external thermostat required.
- No need to purchase a separate external thermostat for accurate temperature control
- Titanium heat exchanger – resistant to corrosion from chlorine or salted ponds.
- Operates in air temperatures as low as -15 °C.
- Capable of heating and cooling, all year round.
- Wifi module – control the heat pump from your smartphone or any web browser
- Built in timer function
- Built in water flow switch
- Includes condensate drain hoses and drain spouts to allow condensation water to be diverted to a flower bed etc.
- Refrigerant gas type – R32 from October 2020, 410a before this date
- 3-Year Parts & Labour Warranty on all parts
Key Benefits of the New Thermotec Inverter Pro Horizontal Range
- The Thermotec Inverter heat pumps have larger size evaporators (fins). This gives them more surface area and allows more heat to be captured from the air. This allows the unit to produce more heat at low air temperatures (down to -15c) than competitor products, making them the best choice for koi ponds and indooor pools which are used all year round.
- Colour touch screen controls – provides easy to use operation and programming of the unit. The colour display shows a graph of the running speed of the unit as well as information such as water inlet and outlet temperatures, ambient air temperature, current water temperature etc
- Programmable temperature accuracy to +/- 0.5c (or down to +/- 0.1c). This makes the Thermotec Inverter ideal for koi ponds or where more accuracy is required over the temperature variance above and below the desired set point. No external thermostat is required.
- Electronic gas pressure sensor – allows the unit to more accurately control the compressor and fan speed resulting in higher efficiency and lower running costs
- Unique wifi platform allows remote support for the product if requried. Our technicians can check all settings and monitor performance of the heat pump remotely to provide you with the highest level of support and the fastest issue resolution.
The sizing guide for koi ponds is:-
For a koi pond that is heated all year round with a winter temperature of around 12c and a summer temperature of around 20-22c, we recommend the following sizing:-
Model |
Max Pond Volume |
---|---|
Thermotec Inverter Horizontal 9kw | 4500 gallons |
Thermotec Inverter Horizontal 12kw | 6000 gallons |
Thermotec Inverter Horizontal 17kw |
7500 gallons |
Thermotec Inverter Horizontal 19.5kw |
9600 gallons |
Thermotec Inverter Horizontal 24kw |
11,600 gallons |
Thermotec Inverter Vertical 29kw |
13,800 gallons |
Thermotec Inverter Vertical 34kw |
19,900 gallons |
Thermotec Inverter Vertical 34kw (3 Phase) | 19,900 gallons |
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi 17KW
£3290.00
£3295.00
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Description
Koi Chronicles are the leading specialist supplier of Koi Pond heat pumps. We have a few years of experience in the market and have used our expertise to research our own preferred range of pond heat pumps.
The New Thermotec Inverter Pro Horizontal range of pond heat pumps really do offer the best in terms of efficiency, performance, reliability and low noise operation.
The New Thermotec Inverter Horizontal range are fully inverter driven. This means that they automatically adjust the speed of the fan and compressor to precisely match the heat demand from the pondl.
The ability to adjust the output of the heat pump allows the New Thermotec Inverter Pro Horizontal to deliver greatly reduced running costs with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is delivered to the pond. This delivers reduced running costs compared with other heat pumps on the market
In addition the inverter technology has a reduced electrical startup requirement, making them ideal for properties with a sensitive or limited electrical supply.
They have larger evaporators (fins) which gives more surface area to extract heat at low air temperatures. This allows the Thermotec Inverter to produce more heat than competitor heat pumps at low air temperatures, making them the best choice for koi ponds and indoor pools which are used all year round. The larger surface area also gives higher efficiency and reduced running costs all year round. Now includes FREE wifi module
Features
- Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output
- High efficiency with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is returned to the pond.
- The desired water temperature can be adjusted in steps of 0.1 °C.
- Equipped with an easy to use 5-inch colour touch screen display / control panel.
- Remote control and monitor your heat pump via an app on your smartphone
- Remote support from HeatPumps4Pools via the wifi module – supplied free of charge with each heat pump
- Top quality Mitsubishi variable speed inverter compressor
- Brushless variable speed DC fan motor – very efficient with extremely quiet operation
- Control panel is lockable to prevent tampering with the pool set temperature (useful for rented properties)
- Display shows temperature & power consumption curves to monitor the performance of the heat pump
- Six different models:9kw, 12kw, 17kw, 19.5kw, 24.2kw, 28 kw and 34kw
- All models single phase power (ie 220v to 240v)
- Suitable for pools, swim spas, hot tubs and koi ponds etc
- Desired water temperature can be set from +10c to +40c
- Soft start with reduced electrical startup requirements for properties with sensitive or limited power supplies
- Low noise, variable speed fan.
- Corrosion resistant case
- Microprocessor controlled
- Fully programmable via the colour touch screen control panel
- Automatic hot gas defrosting.
- Ideal for use on koi ponds – fully programmable temperature accuracy (swing) – down to 0.5c above and below desired water temperature. No external thermostat required.
- No need to purchase a separate external thermostat for accurate temperature control
- Titanium heat exchanger – resistant to corrosion from chlorine or salted ponds.
- Operates in air temperatures as low as -15 °C.
- Capable of heating and cooling, all year round.
- Wifi module – control the heat pump from your smartphone or any web browser
- Built in timer function
- Built in water flow switch
- Includes condensate drain hoses and drain spouts to allow condensation water to be diverted to a flower bed etc.
- Refrigerant gas type – R32 from October 2020, 410a before this date
- 3-Year Parts & Labour Warranty on all parts
Key Benefits of the New Thermotec Inverter Pro Horizontal Range
- The Thermotec Inverter heat pumps have larger size evaporators (fins). This gives them more surface area and allows more heat to be captured from the air. This allows the unit to produce more heat at low air temperatures (down to -15c) than competitor products, making them the best choice for koi ponds and indooor pools which are used all year round.
- Colour touch screen controls – provides easy to use operation and programming of the unit. The colour display shows a graph of the running speed of the unit as well as information such as water inlet and outlet temperatures, ambient air temperature, current water temperature etc
- Programmable temperature accuracy to +/- 0.5c (or down to +/- 0.1c). This makes the Thermotec Inverter ideal for koi ponds or where more accuracy is required over the temperature variance above and below the desired set point. No external thermostat is required.
- Electronic gas pressure sensor – allows the unit to more accurately control the compressor and fan speed resulting in higher efficiency and lower running costs
- Unique wifi platform allows remote support for the product if requried. Our technicians can check all settings and monitor performance of the heat pump remotely to provide you with the highest level of support and the fastest issue resolution.
The sizing guide for koi ponds is:-
For a koi pond that is heated all year round with a winter temperature of around 12c and a summer temperature of around 20-22c, we recommend the following sizing:-
Model |
Max Pond Volume |
---|---|
Thermotec Inverter Horizontal 9kw | 4500 gallons |
Thermotec Inverter Horizontal 12kw | 6000 gallons |
Thermotec Inverter Horizontal 17kw |
7500 gallons |
Thermotec Inverter Horizontal 19.5kw |
9600 gallons |
Thermotec Inverter Horizontal 24kw |
11,600 gallons |
Thermotec Inverter Vertical 29kw |
13,800 gallons |
Thermotec Inverter Vertical 34kw |
19,900 gallons |
Thermotec Inverter Vertical 34kw (3 Phase) | 19,900 gallons |
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi 20KW
£3670.00
£3675.00
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Description
Koi Chronicles are the leading specialist supplier of Koi Pond heat pumps. We have a few years of experience in the market and have used our expertise to research our own preferred range of pond heat pumps.
The New Thermotec Inverter Pro Horizontal range of pond heat pumps really do offer the best in terms of efficiency, performance, reliability and low noise operation.
The New Thermotec Inverter Horizontal range are fully inverter driven. This means that they automatically adjust the speed of the fan and compressor to precisely match the heat demand from the pondl.
The ability to adjust the output of the heat pump allows the New Thermotec Inverter Pro Horizontal to deliver greatly reduced running costs with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is delivered to the pond. This delivers reduced running costs compared with other heat pumps on the market
In addition the inverter technology has a reduced electrical startup requirement, making them ideal for properties with a sensitive or limited electrical supply.
They have larger evaporators (fins) which gives more surface area to extract heat at low air temperatures. This allows the Thermotec Inverter to produce more heat than competitor heat pumps at low air temperatures, making them the best choice for koi ponds and indoor pools which are used all year round. The larger surface area also gives higher efficiency and reduced running costs all year round. Now includes FREE wifi module
Features
- Fully inverter driven with variable speed fan and compressor to deliver the lowest running costs with maximum heat output
- High efficiency with COPs of up to 13. This means that for every 1kw of electricity used by the heat pump, 13kw of heat is returned to the pond.
- The desired water temperature can be adjusted in steps of 0.1 °C.
- Equipped with an easy to use 5-inch colour touch screen display / control panel.
- Remote control and monitor your heat pump via an app on your smartphone
- Remote support from HeatPumps4Pools via the wifi module – supplied free of charge with each heat pump
- Top quality Mitsubishi variable speed inverter compressor
- Brushless variable speed DC fan motor – very efficient with extremely quiet operation
- Control panel is lockable to prevent tampering with the pool set temperature (useful for rented properties)
- Display shows temperature & power consumption curves to monitor the performance of the heat pump
- Six different models:9kw, 12kw, 17kw, 19.5kw, 24.2kw, 28 kw and 34kw
- All models single phase power (ie 220v to 240v)
- Suitable for pools, swim spas, hot tubs and koi ponds etc
- Desired water temperature can be set from +10c to +40c
- Soft start with reduced electrical startup requirements for properties with sensitive or limited power supplies
- Low noise, variable speed fan.
- Corrosion resistant case
- Microprocessor controlled
- Fully programmable via the colour touch screen control panel
- Automatic hot gas defrosting.
- Ideal for use on koi ponds – fully programmable temperature accuracy (swing) – down to 0.5c above and below desired water temperature. No external thermostat required.
- No need to purchase a separate external thermostat for accurate temperature control
- Titanium heat exchanger – resistant to corrosion from chlorine or salted ponds.
- Operates in air temperatures as low as -15 °C.
- Capable of heating and cooling, all year round.
- Wifi module – control the heat pump from your smartphone or any web browser
- Built in timer function
- Built in water flow switch
- Includes condensate drain hoses and drain spouts to allow condensation water to be diverted to a flower bed etc.
- Refrigerant gas type – R32 from October 2020, 410a before this date
- 3-Year Parts & Labour Warranty on all parts
Key Benefits of the New Thermotec Inverter Pro Horizontal Range
- The Thermotec Inverter heat pumps have larger size evaporators (fins). This gives them more surface area and allows more heat to be captured from the air. This allows the unit to produce more heat at low air temperatures (down to -15c) than competitor products, making them the best choice for koi ponds and indooor pools which are used all year round.
- Colour touch screen controls – provides easy to use operation and programming of the unit. The colour display shows a graph of the running speed of the unit as well as information such as water inlet and outlet temperatures, ambient air temperature, current water temperature etc
- Programmable temperature accuracy to +/- 0.5c (or down to +/- 0.1c). This makes the Thermotec Inverter ideal for koi ponds or where more accuracy is required over the temperature variance above and below the desired set point. No external thermostat is required.
- Electronic gas pressure sensor – allows the unit to more accurately control the compressor and fan speed resulting in higher efficiency and lower running costs
- Unique wifi platform allows remote support for the product if requried. Our technicians can check all settings and monitor performance of the heat pump remotely to provide you with the highest level of support and the fastest issue resolution.
The sizing guide for koi ponds is:-
For a koi pond that is heated all year round with a winter temperature of around 12c and a summer temperature of around 20-22c, we recommend the following sizing:-
Model |
Max Pond Volume |
---|---|
Thermotec Inverter Horizontal 9kw | 4500 gallons |
Thermotec Inverter Horizontal 12kw | 6000 gallons |
Thermotec Inverter Horizontal 17kw |
7500 gallons |
Thermotec Inverter Horizontal 19.5kw |
9600 gallons |
Thermotec Inverter Horizontal 24kw |
11,600 gallons |
Thermotec Inverter Vertical 29kw |
13,800 gallons |
Thermotec Inverter Vertical 34kw |
19,900 gallons |
Thermotec Inverter Vertical 34kw (3 Phase) | 19,900 gallons |
Thermotec Inverter Pro Horizontal Heat Pumps with Wi-Fi
Elecro Cygnet EVO2 1kW Digital Heater (All Titanium)
£519.90
£600.00
Elecro Cygnet EVO2 1kW Digital Heater (All Titanium)
Elecro Cygnet EVO2 1kW Digital Heater (All Titanium)
- Easy installation, fully equipped and pre-wired
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Supplied with temperature thermostat & overheating sensor
- Compact, durable design
- Analogue control with 1.2°C differential or digital control with 0.5°C differential and selectable multi-lingual display
- Titanium flow tube and titanium heating element(s)
- Can be floor or vertically wall mounted
- Vortex, long life, stay clean heating element technology
- 100% efficiency throughout the product life
- Silent operation
Digital Heater
Elecro Cygnet EVO2 2kW Digital Heater (All Titanium)
£529.90
£610.00
Elecro Cygnet EVO2 2kW Digital Heater (All Titanium)
Elecro Cygnet EVO2 2kW Digital Heater (All Titanium)
- Easy installation, fully equipped and pre-wired
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Supplied with temperature thermostat & overheating sensor
- Compact, durable design
- Analogue control with 1.2°C differential or digital control with 0.5°C differential and selectable multi-lingual display
- Titanium flow tube and titanium heating element(s)
- Can be floor or vertically wall mounted
- Vortex, long life, stay clean heating element technology
- 100% efficiency throughout the product life
- Silent operation
Digital Heater
Elecro Cygnet EVO2 3kW Digital Heater (All Titanium)
£569.90
£658.00
Elecro Cygnet EVO2 3kW Digital Heater (All Titanium)
Elecro Cygnet EVO2 3kW Digital Heater (All Titanium)
- Easy installation, fully equipped and pre-wired
- Robust, durable construction
- Ultra-reliable flow switch allows safe operation
- Supplied with temperature thermostat & overheating sensor
- Compact, durable design
- Analogue control with 1.2°C differential or digital control with 0.5°C differential and selectable multi-lingual display
- Titanium flow tube and titanium heating element(s)
- Can be floor or vertically wall mounted
- Vortex, long life, stay clean heating element technology
- 100% efficiency throughout the product life
- Silent operation
Digital Heater
AquaForte Profi Heaters 1Kw With Stat (Stainless)
£234.90
£249.95
AquaForte Profi Heaters 1Kw With Stat (Stainless)
The AquaForte ProfiHeater can be used for heating your pond water. The ProfiHeater is equipped with an adjustable thermostat (up to 40 º C). Both the heating element with temperature sensor and the interior of the housing is made of high grade 316L stainless steel. The ProfiHeater can be connected by means of a hose (Ø 25, 32 and 40 mm) or PVC tube (Ø 50 and 63 mm). Max. pressure: 2 bar.
Includes: 2 hose tails 25/32/40mm and PVC fittings 50/63mm. 230V.
If you need any more help regarding fittings and fixyures then please contact us!
Stainless Heater
AquaForte Profi Heaters 2Kw With Stat (Stainless)
£247.90
£259.95
AquaForte Profi Heaters 2Kw With Stat (Stainless)
The AquaForte ProfiHeater can be used for heating your pond water. The ProfiHeater is equipped with an adjustable thermostat (up to 40 º C). Both the heating element with temperature sensor and the interior of the housing is made of high grade 316L stainless steel. The ProfiHeater can be connected by means of a hose (Ø 25, 32 and 40 mm) or PVC tube (Ø 50 and 63 mm). Max. pressure: 2 bar.
Includes: 2 hose tails 25/32/40mm and PVC fittings 50/63mm. 230V.
If you need any more help regarding fittings and fixyures then please contact us!
Stainless Heater
AquaForte Profi Heaters 3Kw With Stat (Stainless)
£273.10
£289.95
AquaForte Profi Heaters 3Kw With Stat (Stainless)
The AquaForte ProfiHeater can be used for heating your pond water. The ProfiHeater is equipped with an adjustable thermostat (up to 40 º C). Both the heating element with temperature sensor and the interior of the housing is made of high grade 316L stainless steel. The ProfiHeater can be connected by means of a hose (Ø 25, 32 and 40 mm) or PVC tube (Ø 50 and 63 mm). Max. pressure: 2 bar.
Includes: 2 hose tails 25/32/40mm and PVC fittings 50/63mm. 230V.
If you need any more help regarding fittings and fixyures then please contact us!
Stainless Heater
Motorised Pond Vision 4K (8MP)
£279.99
£289.99
IP EXTERNAL DOME CAMERA
Monitor your koi with a high resolution camera system at the cutting edge of tomorrow’s technology. Have the flexibility to study your koi pond in the palm of your hand from a mobile device and observe your fish in their own environment anywhere in the world!
High quality imaging with 4 K resolution
Motorized Varifocal lens for easy installation and monitoring
Excellent low-light performance with powered-by-DarkFighter technology
Focusing on human and vehicle classification based on deep learning
Clear imaging against strong back light due to 120 dB WDR technology
Efficient H.265+ compression technology
Water and dust resistant IP66 and vandal proof IK10
(Unit Only) Please leave us a message if interested in configuration and Pond Vision installation. Leave a message
We are passionate about two things - fish and technology. We aim to combine the two, bringing the commercial technology knowhow to the consumer market and provide an up to date viewing system for your pond.
Motorized Pond Vision (4MP)
£239.99
£249.99
IP EXTERNAL DOME CAMERA
Monitor your koi with a high resolution camera system at the cutting edge of tomorrow’s technology. Have the flexibility to study your koi pond in the palm of your hand from a mobile device and observe your fish in their own environment anywhere in the world!
High quality imaging
Motorized Varifocal lens for easy installation and monitoring
Excellent low-light performance with powered-by-DarkFighter technology
Focusing on human and vehicle classification based on deep learning
Clear imaging against strong back light due to 120 dB WDR technology
Efficient H.265+ compression technology
Water and dust resistant IP66 and vandal proof IK10
(Unit Only) Please leave us a message if interested in configuration of product and Pond Vision installation. Leave a message
We are passionate about two things - fish and technology. We aim to combine the two, bringing the commercial technology knowhow to the consumer market and provide an up to date viewing system for your pond.
Koi Pond Vision 4K (8MP)
£224.99
£229.99
IP EXTERNAL DOME CAMERA
Monitor your koi with a high resolution camera system at the cutting edge of tomorrow’s technology. Have the flexibility to study your koi pond in the palm of your hand from a mobile device and observe your fish in their own environment anywhere in the world!
Hikvision 8MP IR Fixed Turret Network AcuSense, Powered by Darkfighter Camera, Fixed 2.8mm lens, Built-In Microphone, IP66, 12 VDC ± 25%/PoE, 3 year warranty. WHITE
*Will Also Need Installation Box Please See Installation Box Fixed Turret
(Unit Only) Please leave us a message if interested in configuration and Pond Vision installation. Leave a message
We are passionate about two things - fish and technology. We aim to combine the two, bringing the commercial technology knowhow to the consumer market and provide an up to date viewing system for your pond.
Koi Pond Vision 4K (8MP)
£224.99
£229.99
IP EXTERNAL DOME CAMERA
Monitor your koi with a high resolution camera system at the cutting edge of tomorrow’s technology. Have the flexibility to study your koi pond in the palm of your hand from a mobile device and observe your fish in their own environment anywhere in the world!
Hikvision 8MP IR Fixed Turret Network AcuSense, Powered by Darkfighter Camera, Fixed 2.8mm lens, Built-In Microphone, IP66, 12 VDC ± 25%/PoE, 3 year warranty. BLACK
*Will Also Need Installation Box Please See Installation Box Fixed Turret
(Unit Only) Please leave us a message if interested in configuration and Pond Vision installation. Leave a message
We are passionate about two things - fish and technology. We aim to combine the two, bringing the commercial technology knowhow to the consumer market and provide an up to date viewing system for your pond.
Koi Pond Vision 2K (4MP)
£169.99
£179.99
IP EXTERNAL DOME CAMERA
Monitor your koi with a high resolution camera system at the cutting edge of tomorrow’s technology. Have the flexibility to study your koi pond in the palm of your hand from a mobile device and observe your fish in their own environment anywhere in the world!
Hikvision 4MP IR Fixed Turret Network AcuSense, Powered by Darkfighter Camera, Fixed 2.8mm lens, Built-In Microphone, IP66, 12 VDC ± 25%/PoE, 3 year warranty. WHITE
*Will Also Need Installation Box Please See Installation Box Fixed Turret
(Unit Only) Please leave us a message if interested in configuration and Pond Vision installation. Leave a message
We are passionate about two things - fish and technology. We aim to combine the two, bringing the commercial technology knowhow to the consumer market and provide an up to date viewing system for your pond.
Koi Pond Vision 2K (4MP)
£169.99
£179.99
IP EXTERNAL DOME CAMERA
Monitor your koi with a high resolution camera system at the cutting edge of tomorrow’s technology. Have the flexibility to study your koi pond in the palm of your hand from a mobile device and observe your fish in their own environment anywhere in the world!
Hikvision 4MP IR Fixed Turret Network AcuSense, Powered by Darkfighter Camera, Fixed 2.8mm lens, Built-In Microphone, IP66, 12 VDC ± 25%/PoE, 3 year warranty. BLACK
*Will Also Need Installation Box Please See Installation Box Fixed Turret
(Unit Only) Please leave us a message if interested in configuration and Pond Vision installation. Leave a message
We are passionate about two things - fish and technology. We aim to combine the two, bringing the commercial technology knowhow to the consumer market and provide an up to date viewing system for your pond.
Wall Mount Bracket
£25.00
£27.00
Wall Mount bracket
Wall Mount bracket for Fixed Lens Turrets 3 Year Warranty
Back Box Fixed Turrets
£15.00
£16.00
Junction Box Fixed
Junction Box Fixed Turrets, 3 year warranty
128GB microSDHC card
£44.00
£45.00
128GB microSDHC card
This 128GB microSDHC card is designed for high resolution images and footage
Filter House Wi-Fi
£149.99
£169.99
Cisco Wi-Fi
With the Cisco Business 145AC 802.11ac 2x2 Wave 2 Access Point 4 GbE Ports One PoE -with Wall Plate you can enjoy super fast internet speeds within your filter house. Here at Koi Chronicles we want to make it possible to integrate all our smart connected filter house equipment. From air source heat pumps to smart IoT device's todays demanding products require us to be safely connected to the internet. (Unit Only) please leave us a message if your interested in configuration and installation for the filter house. Leave a message
PoE Injector
£52.99
£59.99
Cisco PoE Injector
Works as an power source for the Filter House Wi-Fi unit.
Power your device via Ethernet cabling (Unit Only) Please leave us a message if your interested in configuration and Wi-Fi installation for your filter house. Leave a message
WiFi Power Strip
£34.99
Smart TP-Link Kasa
Control electronics from anywhere using your phone with the Kasa Smart Wi-Fi Power Strip. With 3 smart outlets that can be separately managed and 2 always-on USB ports, the Kasa Smart Wi-Fi Power Strip meets your diverse needs. You can turn devices on/off, check status, create schedules and set timers using the Kasa app. With surge protection, it can shield sensitive electronics and appliances from sudden power surges and spikes. Add voice control to any electronic device by pairing with Alexa and Google Assistant.
WiFi Mini Smart Plug
£14.99
£17.99
Smart TP-Link Kasa
Control electronics from anywhere using your phone with the Kasa Smart WiFi Plug. You can turn devices on/off, check status, create schedules and set timers using the Kasa app. Gain peace of mind by checking on your devices remotely and always coming home to a well-lit house. Use away-mode to make it look like you are home when you travel and have lights turn on/off at set times to conserve energy and save on your next bill. With power consumption, the smart plug can tell users how much electricity an electronic device used yesterday, last week, last month and even last year. Add voice control to any electronic device by pairing with Amazon Alexa and Google Assistant.
Cat 6 Direct Burial 15M
£41.50
£45.00
LSZH Shielded Solid Armoured Cable
Category 6 LSZH Steel Wire Armoured Foiled Shielded Network Cable
Category 6 FTP shielded solid core steel wire armoured (SWA) External Cable offers a low cost alternative to installing ducts and is perfect for applications where a tough high quality cable is required. The foil shield provides additional protection from interference when installed near high voltage power cables and machinery.
Key Features
- Ultra tough steel wire armour protection
- Overall shield of the 4 pairs
- Exceeds Cat6 specification
- Suitable for Gigabit networks
- Tough durable and suitable for direct burial
(Cable Only) Please leave us a message if interested for More Cable lengths or Koi Pond Vision or Wi-Fi installation. Leave a message
Cat 6 External 15M
£20.70
£22.05
External Cat6
Category 6 LSZH External Grade Network Cable
Category 6 solid core external Cable offers a low cost alternative if you have ducts in place and is perfect for applications where high quality cable is required.
Key Features
- Overall shield of the 4 pairs
- Exceeds Cat6 specification
- Suitable for Gigabit networks
- Tough durable and suitable for ducts
(Cable Only) Please leave us a message if interested for More Cable lengths or Koi Pond Vision or Wi-Fi installation. Leave a message
Cat 6 Direct Burial 30M
£83.00
£90.00
LSZH Shielded Solid Armoured Cable
Category 6 LSZH Steel Wire Armoured Foiled Shielded Network Cable
Category 6 FTP shielded solid core steel wire armoured (SWA) External Cable offers a low cost alternative to installing ducts and is perfect for applications where a tough high quality cable is required. The foil shield provides additional protection from interference when installed near high voltage power cables and machinery.
Key Features
- Ultra tough steel wire armour protection
- Overall shield of the 4 pairs
- Exceeds Cat6 specification
- Suitable for Gigabit networks
- Tough durable and suitable for direct burial
(Cable Only) Please leave us a message if interested for More Cable lengths or Koi Pond Vision or Wi-Fi installation. Leave a message
Cat 6 External 30M
£41.40
£44.10
External Cat6
Category 6 LSZH External Grade Network Cable
Category 6 solid core external Cable offers a low cost alternative if you have ducts in place and is perfect for applications where high quality cable is required.
Key Features
- Overall shield of the 4 pairs
- Exceeds Cat6 specification
- Suitable for Gigabit networks
- Tough durable and suitable for ducts
(Cable Only) Please leave us a message if interested for More Cable lengths or Koi Pond Vision or Wi-Fi installation. Leave a message
4" Class C Pressure pipe
£52.50
£60.99
4" 3 Meter Lengths
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
4" Pressure Ball Valve
£125.90
£147.00
(Double Union) BLUE HANDLE
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Valterra Slide Valve
£51.90
£54.70
4" Valterra Slide Valve
PVC slide valve with Stainless Steel spindle with triple sealing at the top (3 x O-ring)
Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure.
4" Pressure Union (Plain)
£49.90
£53.99
4" Union (Plain)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pressure Union (Plain to Thread)
£43.90
£46.50
4" Union (Plain to Thread)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pressure Flanged tank connector
£19.90
£21.90
4" Flanged tank connector
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pressure Tee
£26.00
£29.00
4" T-Piece
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pressure 90 Elbow
£19.90
£22.42
90 4" Elbow bend
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pressure Swept 90 Elbow
£62.00
£64.00
4" Swept 90 Elbow
Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure. Extensions can be screwed onto the spindle.
4" Pressure 45
£19.90
£27.11
4" Pressure 45
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pressure Straight Connector
£12.00
£14.00
4" Coupler
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Reducer (Pressure to Waste)
£4.90
£6.50
4" Reducer (Pressure to Waste)
Reduce's pressure pipe fittings to waste fitment.
4"- 3" Pressure Reducer
£9.90
£10.70
4"- 3" Reducer (Pressure)
10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Pipe Clamp Bracket
£8.50
£9.70
4" Pipe Clamp Bracket
Cobra Fixing for 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Class C Pressure pipe
£39.50
£44.99
3" 3 Meter Lengths
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
3" Pressure Ball Valve
£86.90
£96.99
3" (Double Union) BLUE HANDLE
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Valterra Slide Valve
£23.90
£24.99
3" Valterra Slide Valve
PVC slide valve with Stainless Steel spindle with triple sealing at the top (3 x O-ring)
Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure.
3" Pressure Union (Plain)
£34.90
£39.99
3" Union (Plain)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure Union (Plain to Thread)
£36.90
£38.90
3" Union (Plain to Thread)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure Flanged tank connector
£17.90
£20.99
3" Flanged tank connector
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure Tee
£13.90
£17.99
3" T-Piece
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure 90 Elbow
£13.90
£14.70
90 3" Elbow bend
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure Swept 90 Elbow
£38.90
£42.50
3" Swept 90 Elbow
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure 45
£12.50
£14.40
3" Pressure 45
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pressure Straight Connector
£7.40
£9.10
3" Coupler
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Reducer (Pressure to Waste)
£4.40
£5.70
3" Reducer (Pressure to Waste)
Reduce's pressure pipe fittings to waste fitment.
3"- 2" Pressure Reducer
£7.80
£8.30
3"- 2" Reducer (Pressure)
10 BAR PVC pressure fittings, produced in accordance to DIN standards.
3" Pipe Clamp Bracket
£6.50
£7.00
3" Pipe Clamp Bracket
Cobra Fixing for 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Class C Pressure pipe
£22.90
£25.99
2" 3 Meter Lengths
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
2" Pressure Ball Valve
£21.90
£23.80
2" (Double Union) BLUE HANDLE
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Valterra Slide Valve
£16.90
£17.99
2" Valterra Slide Valve
PVC slide valve with Stainless Steel spindle with triple sealing at the top (3 x O-ring)
Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure.
2" Valterra Non-return valve
£39.90
£43.10
2" Valterra Non-return valve
2" Valterra sprung Non-return valve
2" Pressure Union (Plain)
£11.85
£12.99
2" Union (Plain)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Union (Plain to Thread)
£16.80
£17.85
2" Union (Plain to Thread)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Flanged tank connector
£14.10
£15.40
2" Flanged tank connector
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pond Return Straight
£21.50
£22.99
2" Pond Return Straight
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Tee
£4.10
£5.80
2" T-Piece
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure 90 Elbow
£4.65
£5.20
90 2" Elbow bend
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Swept 90 Elbow
£15.10
£16.80
2" Swept 90 Elbow
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure 45
£5.10
£5.70
2" Pressure 45
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Straight Connector
£3.10
£3.90
2" Coupler
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Union to (Male Thread)
£18.50
£19.50
2" Union to (Male Thread)
For 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Socket Plain Threaded
£4.70
£5.53
2" Socket Plain Threaded
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pressure Plain male - female thread
£4.30
£5.10
2" Plain male - female thread
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Reducer (Pressure to Waste)
£1.80
£1.90
2" Reducer (Pressure to Waste)
Reduce's pressure pipe fittings to waste fitment.
2" - 1.5" Pressure Reducer
£2.40
£2.70
2" - 1.5" Reducer (Pressure)
10 BAR PVC pressure fittings, produced in accordance to DIN standards.
2" Pipe Clamp Bracket
£3.20
£3.50
2" Pipe Clamp Bracket
Cobra Fixing for 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Class C Pressure pipe
£19.90
£22.99
1.5" 3 Meter Lengths
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
1.5" Pressure Ball Valve
£15.90
£17.99
1.5" (Double Union) BLUE HANDLE
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Valterra Slide Valve
£10.90
£11.99
1.5" Valterra Slide Valve
PVC slide valve with Stainless Steel spindle with triple sealing at the top (3 x O-ring)
Santoprene seals (100% chemical resistant) which are suited for vacuum and pressure.
1.5" Flapper Valve Non Return
£28.50
£34.20
1.5" Non-return valve
1.5" Flapper Valve Non - Return 1.5" Inculding Split Unions)
1.5" Pressure Union (Plain)
£7.20
£7.90
1.5" Union (Plain)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Union (Plain to Thread)
£9.30
£11.90
1.5" Union (Plain to Thread)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Flanged tank connector
£13.10
£14.00
1.5" Flanged tank connector
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Tee
£3.10
£3.90
1.5" T-Piece
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure 90 Elbow
£3.60
£3.90
90 1.5" Elbow bend
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Swept 90 Elbow
£11.40
£12.50
1.5" Swept 90 Elbow
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure 45
£3.80
£3.90
1.5" Pressure 45
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Straight Connector
£2.80
£3.50
1.5" Coupler
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Union to (Male Thread)
£11.90
£12.99
1.5" Union to (Male Thread)
For 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Socket Plain Threaded
£4.00
£4.70
1.5" Socket Plain Threaded
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pressure Plain male - female thread
£4.00
£4.70
1.5" Plain male - female thread
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Reducer (Pressure to Waste)
£3.00
£4.40
1.5" Reducer (Pressure to Waste)
Reduce's pressure pipe fittings to waste fitment.
1.5" - 1" Pressure Reducer
£3.10
£3.40
1.5" - 1" Pressure Reducer
10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1.5" Pipe Clamp Bracket
£2.20
£2.50
1.5" Pipe Clamp Bracket
Cobra Fixing for 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Class C Pressure pipe
£13.90
£15.99
1" 3 Meter Lengths
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
1" Pressure Ball Valve
£12.90
£13.99
1" (Double Union) BLUE HANDLE
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Flapper Valve Non Return
£19.90
£22.80
1" Non-return valve
1" Flapper Valve Non - Return 1.5" Inculding Split Unions)
1" Pressure Union (Plain)
£5.10
£5.90
1" Union (Plain)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pressure Union (Plain to Thread)
£5.30
£5.60
1" Union (Plain to Thread)
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pressure Tee
£2.10
£2.50
1" T-Piece
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pressure 90 Elbow
£2.10
£2.50
90 1" Elbow bend
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pressure 45
£2.10
£2.50
1" Pressure 45
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pressure Straight Connector
£2.20
£2.50
1" Coupler
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pressure Socket Plain Threaded
£2.90
£3.40
1" Socket Plain Threaded
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
1" Pipe Clamp Bracket
£1.50
£1.60
1" Pipe Clamp Bracket
Cobra Fixing for 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
4" Waste Solvent Weld Pipe
£29.50
£29.99
4" Solvent Weld Pipe
4" Inch Solvent Weld Waste Pipe
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
4" Waste 90 Elbow
£12.95
£13.50
90 4" Elbow bend
4" Inch Solvent Weld Waste Pipe Elbow 90
4" Waste to 3" Reducer
£4.80
£5.00
4" Waste to 3" Reducer
4" Inch Solvent Weld 4" Waste to 3" Reducer
3" Waste Solvent Weld Pipe
£26.00
£27.20
3" Solvent Weld Pipe
3" Inch Solvent Weld Waste Pipe
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
3" Waste Union (Plain)
£8.90
£9.90
3" Union (Plain)
3" Inch Solvent Weld Waste Pipe Union
3" Waste Flanged tank connector
£6.50
£6.90
3" Flanged tank connector
Applications: inlets and outlets in tanks and ponds. Incl. galvanized screws.
Construction: ABS with double internal glue connection.
3" Waste Tee
£14.90
£17.50
3" Waste T-Piece
3" Inch Solvent Weld Waste Pipe T Piece
3" Waste 90 Elbow
£11.30
£12.35
90 3" Elbow bend
3" Inch Solvent Weld Waste Pipe Elbow 90
3" Waste 45 Elbow
£8.90
£9.80
45 3" Elbow Bend
3" Inch Solvent Weld Waste Pipe Elbow Bend 45
3" Waste Straight Connector
£5.90
£6.40
3" Waste Straight Connector
3" Inch Solvent Weld Waste Straight Connector
3" Waste to 2" Reducer
£3.80
£4.00
3" Waste to 2" Reducer
3" Inch Solvent Weld 3" Waste to 2" Reducer
2" Solvent Weld Pipe
£12.50
£13.99
2" Solvent Weld Pipe
2" Inch Solvent Weld Waste Pipe
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
2" Waste Union (Plain)
£6.50
£6.90
2" Union (Plain)
2" Inch Solvent Weld Waste Pipe Union
2" Waste Flanged tank connector
£5.50
£5.99
2" Flanged tank connector
Applications: inlets and outlets in tanks and ponds. Incl. galvanized screws.
Construction: ABS with double internal glue connection.
2" Waste Tee
£2.20
£2.55
2" Waste T-Piece
2" Inch Solvent Weld Waste Pipe T Piece
2" Waste 90 Elbow
£2.20
£3.50
90 2" Elbow bend
2" Inch Solvent Weld Waste Pipe Elbow 90
2" Waste 45 Elbow
£2.20
£3.50
45 2" Elbow Bend
2" Inch Solvent Weld Waste Pipe Elbow Bend 45
2" Waste Straight Connector
£2.20
£3.50
2" Waste Straight Connector
3" Inch Solvent Weld Waste Straight Connector
2" Waste to 1.5" Reducer
£2.00
£2.50
2" Waste to 1.5" Reducer
2" Inch Solvent Weld 3" Waste to 1.5" Reducer
2" Waste Tank connector
£3.50
£3.99
2" Tank connector
Applications: inlets and outlets in tanks and ponds with an internal glue connection.
1.5" Waste Solvent Weld Pipe
£9.90
£10.99
1.5" Solvent Weld Pipe
1.5" Inch Solvent Weld Waste Pipe
Attention Collection Only Due to Its Size!! Or if you have any special requests please Leave a message
1.5" Waste Union (Plain)
£3.10
£3.99
1.5" Union (Plain)
1.5" Inch Solvent Weld Waste Pipe Union
1.5" Waste Flanged tank connector
£5.30
£5.79
1.5" Flanged tank connector
Applications: inlets and outlets in tanks and ponds. Incl. galvanized screws.
Construction: ABS with double internal glue connection.
1.5" Waste Tee
£2.90
£3.59
1.5" Waste T-Piece
1.5" Inch Solvent Weld Waste Pipe T Piece
1.5" Waste 90 Elbow
£2.90
£3.50
90 1.5" Elbow bend
1.5" Inch Solvent Weld Waste Pipe Elbow 90
1.5" Waste 45 Elbow
£2.90
£3.50
45 1.5" Elbow Bend
1.5" Inch Solvent Weld Waste Pipe Elbow Bend 45
1.5" Waste Straight Connector
£2.20
£3.30
1.5" Waste Straight Connector
1.5" Inch Solvent Weld Waste Straight Connector
1.5" Waste Tank connector
£2.90
£3.50
1.5" Tank connector
Applications: inlets and outlets in tanks and ponds with an internal glue connection.
1.5" Waste Strainer
£3.99
£5.00
1.5" Strainer
Applications: inlets and outlets in tanks and ponds with an solvent glue connection.
1.5" Hose Tail Stepped
£3.99
£5.00
1.5" Hose Tail Stepped
Applications: To attach Flexible pipe to solvent with an solvent glue connection.
1.5" Hose Tail Stepped Threaded
£3.99
£5.00
1.5" Hose Tail Stepped Threaded
Applications: To attach Flexible pipe to solvent with an solvent glue connection with male threaded end.
Spindrifter 4" Twin Outlet Pressure Bottom Drain (Concrete or Fibreglass)
£207.95
£209.99
4" Twin Outlet bottom Drain for Concrete or Fibreglass
The Spindrifter bottom drain is known worldwide for its quality and design. This unit completely replaces the Standard Bottom
Drain. The most noticeable feature is the extra connection in the sump of the drain. This allows the air supply hose to enter the
sump independently of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for
blanket weed to attach. The membrane and backing plate fit into a recess in the specially manufactured dome (provided). The recess
in the dome prevents the membrane from becoming detached. The complete assembly is secured to the bottom drain by means of
stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a
nickel plated connector.
Spindrifter 4" Pressure Bottom Drain (Concrete or Fibreglass)
£182.95
£183.99
4" bottom Drain for Concrete or Fibreglass
The Spindrifter bottom drain is known worldwide for its quality and design. This unit completely replaces the Standard Bottom
Drain. The most noticeable feature is the extra connection in the sump of the drain. This allows the air supply hose to enter the
sump independently of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for
blanket weed to attach. The membrane and backing plate fit into a recess in the specially manufactured dome (provided). The recess
in the dome prevents the membrane from becoming detached. The complete assembly is secured to the bottom drain by means of
stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a
nickel plated connector.
Spindrifter 3" Pressure Bottom Drain (Concrete or Fibreglass)
£185.95
£189.99
3" bottom Drain for Concrete or Fibreglass
The Spindrifter bottom drain is known worldwide for its quality and design. This unit completely replaces the Standard Bottom
Drain. The most noticeable feature is the extra connection in the sump of the drain. This allows the air supply hose to enter the
sump independently of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for
blanket weed to attach. The membrane and backing plate fit into a recess in the specially manufactured dome (provided). The recess
in the dome prevents the membrane from becoming detached. The complete assembly is secured to the bottom drain by means of
stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a
nickel plated connector.
Spindrifter 2" Pressure Bottom Drain (Concrete or Fibreglass)
£140.95
£142.95
2" bottom Drain for Concrete or Fibreglass
The Spindrifter bottom drain is known worldwide for its quality and design. This unit completely replaces the Standard Bottom
Drain. The most noticeable feature is the extra connection in the sump of the drain. This allows the air supply hose to enter the
sump independently of the water outlet pipe, thus eliminating the possibility of restriction to the water flow and somewhere else for
blanket weed to attach. The membrane and backing plate fit into a recess in the specially manufactured dome (provided). The recess
in the dome prevents the membrane from becoming detached. The complete assembly is secured to the bottom drain by means of
stem, which also provides the air inlet. Most water pipe sizes can be accommodated, the customer to specify. The air inlet is via a
nickel plated connector.
Liner flange kit for 4" spindifter
£20.95
£21.99
Liner flange kit for 4" spindifter
The liner flange kit allows you to fit 4" spindrifter to liner
Liner flange kit for 3" spindifter
£20.95
£21.99
Liner flange kit for 3" spindifter
The liner flange kit allows you to fit 3" spindrifter to liner
Liner flange kit for 2" spindifter
£15.95
£16.99
Liner flange kit for 2" spindifter
The liner flange kit allows you to fit 2" spindrifter to liner
FILTREAU REPLACEMENT DRUM SCREEN
£79.00
£89.00
FILTREAU DRUM SCREEN
Filtreau Drumfilter Replacement Screeen
Filtreau Spare screen for drum (Hi Flow)
FILTREAU REPLACEMENT MOTOR AND GEARBOX
£122.50
£129.99
FILTREAU REPLACEMENT MOTOR AND GEARBOX
The Filtreau Replacement Motor And Gearbox is a genuine Filtreau replacement and is compatible with all of the Filtreau Filtration Systems.
1.5" Cage Filter
£9.90
£11.99
1.5" Cage Filter
These Stainless Steel Filter cages are ideal for K1 conversions, Moving Beds, block built filters, vortex's etc, you could put them at the end of the settlement chamber where the 4 inch pipes go through to the next chamber.
For customers that have coverted there multi chamber filters in to moving Kaldnes media these filter cages can also be used over the transport ports between each chamber.
2" Cage Filter
£11.90
£12.99
2" Cage Filter
These Stainless Steel Filter cages are ideal for K1 conversions, Moving Beds, block built filters, vortex's etc, you could put them at the end of the settlement chamber where the 4 inch pipes go through to the next chamber.
For customers that have coverted there multi chamber filters in to moving Kaldnes media these filter cages can also be used over the transport ports between each chamber.
EA 8mm Sinking Airline per meter
£6.59
£8.40
EA 8mm Sinking Airline Per meter
EA 8mm Sinking Airline (per meter) |
EA 10mm Sinking Airline per meter
£9.59
£10.40
EA 10mm Sinking Airline Per meter
EA 10mm Sinking Airline (per meter) |
12mm NYLON Pneumatic Airline Per Meter
£1.95
£2.50
12mm NYLON Pneumatic Airline
12mm NYLON Pneumatic Airline (Black) (Per Meter)
Spare Airline for your Nexus or Eazypod
12mm Air Push Fit Flow Speed Control Valve
£8.90
£9.99
12mm Air Push Fit Flow Speed Control Valve
12mm Air Push fit Flow Speed Control Valve
Control your air flow speed with this fitting or use one air pump to control between two devices e.g bottom drain air and bio chamber Spares for your nexus or eazypod
12mm Air Push Fit Non return check Valve
£9.90
£11.99
12mm Air Push Fit Non return check Valve
12mm Air Push fit Non return check Valve
Is your air pump lower than the pond? Then this product will protect your air pump from being water damaged. Spares for your nexus or eazypod
12mm Air Push Fit Elbow
£5.10
£5.90
12mm Air Push Fit Elbow
12mm Air Push Elbow
Pneumatic Equal Elbow Connector Fitting spares for your nexus or eazypod
12mm Air Push Fit T-Piece
£5.10
£5.90
12mm Air Push Fit T-Piece
12mm Air Push T-Piece
Pneumatic Equal Tee Connector Fitting spares for your nexus or eazypod
12mm Air Push Fit Coupler
£4.90
£5.70
12mm Air Push Fit Coupler
12mm Air Push Coupler
Pneumatic Coupler Connector Fitting spares for your nexus or eazypod
Oase Aquaskim 20 Standing Skimmer
£69.90
£74.99
Oase Aquaskim 20 Standing Skimmer
Oase Aquaskim 20 Standing Skimmer
The AquaSkim offers powerful suction of up to 40 m² pond surface and adapts to water level changes of up to 120 mm – making it an effective addition to the entire filter system. It is worth the effort: significantly better water quality and visibility depth through direct dirt extraction from the surface.
Oase AquaSkim 20 Pond Skimmer Features
• Recommended Flowrate 4000 lph - 8000 lph
• Pond Depth: Min - 320mm . Max - 800mm
• Base Diameter: 350mm
• Hosetail takes 25, 32 and 38mm hose.
- The result is clearly improved water quality and viewing depth through direct suction removal of pollutants on the surface
- Base with large surface receptacle shell for rocks as ballast
- Easy maintenance with easily accessible coarse debris basket
- Debris basket can also be taken out from a distance via grip hooks
- Ideal combination with AquaMax Eco Premium filter and watercourse pumps
- Powerful suction cleaning of pond surfaces up to 20 m²
- Adapts to water level differences of up to 100 mm
- Ideal for use with AquaMax Eco Premium 4000–8000
Specifications
Model | Tube Diameter | Filter Basket Volume | Possible Water Level Difference | Guarantee |
AquaSkim 20 | 80mm | 1.2 litres | 100mm | 3 + 2 Years |
1" 8mm Air Feed Ball Valve
£9.90
£11.99
1" 8mm Air Feed Ball Valve
Dark grey 10 BAR PVC pressure fittings, produced in accordance to DIN standards.
Spindrifter direct air feed set
£20.95
£21.99
Spindrifter (1" pressure converters)
By using the converter set you can seal the ends of the (1") ducting pipe and use it to pump the air through thus avoiding a column of stagnant water.
1.5" Inch Retro-fit Drain Weighted
£78.95
£99.95
1.5" Inch Retro-fit Drain Weighted
1.5" Inch Retro-fit Drain Weighted with 1.5" pickup
Wide-mouth In-wall skimmer
£48.95
£53.99
In-wall skimmer (Liner / Concrete)
Surface Skimmers are an important piece of equipment for any pond, but more essentially for the Koi Pond, if you are planning to build a Koi pond make sure fit one of these into your construction process.
Pond skimmers are easy to install. They will collect any debris that falls onto the surface of your pond or leftover food into a collection basket before it has chance to sink to the bottom and starts breakdown and effect the quality of your water.
The fitting on the bottom of the skimmer is a 1 1/2" female thread you can modify these to suit your requirements
Standard In-wall skimmer
£24.99
£32.99
Standard In-wall skimmer (Liner / Concrete)
Surface Skimmers are an important piece of equipment for any pond, but more essentially for the Koi Pond, if you are planning to build a Koi pond make sure fit one of these into your construction process.
Pond skimmers are easy to install. They will collect any debris that falls onto the surface of your pond or leftover food into a collection basket before it has chance to sink to the bottom and starts breakdown and effect the quality of your water.
The fitting on the bottom of the skimmer is a 1 1/2" female thread. However you can modify these to suit your requirements
Grid for front of Standard Skimmer
£21.99
£25.99
Grid for front of Standard Skimmer
Front grid for standard in-wall skimmer.
Surface Skimmers are an important piece of equipment for any pond, but more essentially for a Koi Pond, if you are planning to build a Koi pond make sure fit one of these into your construction process.
Pond skimmers are easy to install. They will collect any debris that falls onto the surface of your pond or leftover food into a collection basket before it has chance to sink to the bottom and starts breakdown and effect the quality of your water.
Grid front Wide-mouth Skimmer
£32.90
£35.60
Grid front Wide-mouth Skimmer
Front grid for standard wide mouth in-wall skimmer.
Surface Skimmers are an important piece of equipment for any pond, but more essentially for a Koi Pond, if you are planning to build a Koi pond make sure fit one of these into your construction process.
Pond skimmers are easy to install. They will collect any debris that falls onto the surface of your pond or leftover food into a collection basket before it has chance to sink to the bottom and starts breakdown and effect the quality of your water.
Solvent Weld Glue 240ml
£9.90
£12.99
Solvent Weld Glue 240ml
Extremely fast setting, low VOC PVC cement for all classes and schedules with interference fit through 6″ (160 mm) diameter, Schedule 80 through 4″ (110 mm) diameter. Premium formula for wet conditions and/or quick pressurization.
Suitable for irrigation, plumbing, and pool & spa applications. Can be used without primer on non-pressure systems if local codes permit.
Solvent Weld Glue 500ml
£19.90
£24.99
Solvent Weld Glue 500ml
Extremely fast setting, low VOC PVC cement for all classes and schedules with interference fit through 6″ (160 mm) diameter, Schedule 80 through 4″ (110 mm) diameter. Premium formula for wet conditions and/or quick pressurization.
Suitable for irrigation, plumbing, and pool & spa applications. Can be used without primer on non-pressure systems if local codes permit.
63mm Pressure flexi Solvent Weld per meter
£8.75
£9.50
63mm Pressure flexi Solvent Weld per meter
Very flexible pvc suction/pressure hose, also at low temperatures. Suited for temperatures from - 10°c to + 60°c. Used in conjunction with our (2" - 63mm adapter socket fitting) See Pressure Pipe Category
2" - 63mm adapter socket
£3.50
£3.99
2" - 63mm adapter socket
Applications: Takes you from 2" pressure solid pipe to 63mm Solvent flexible pipe (please see Drain and Accessories) For 63mm Solvent flexible pipe per meter
50mm Pressure flexi Solvent Weld per meter
£5.75
£6.50
50mm Pressure flexi Solvent Weld per meter
Very flexible pvc suction/pressure hose, also at low temperatures. Suited for temperatures from - 10°c to + 60°c. Used in conjunction with our (1.5" - 50mm adapter socket fitting) See Pressure Pipe Category
1.5" - 50mm adapter socket
£2.50
£2.70
1.5" - 50mm adapter socket
Applications: Takes you from 1.5" pressure solid pipe to 50mm Solvent flexible pipe (please see Drain and Accessories) For 50mm Solvent flexible pipe per meter
PTFE Thread Seal Tape
£1.20
£1.50
PTFE Thread Seal Tape
|
Aqua Forte Super-Strong Fix & Seal
£12.49
£13.49
Aqua Forte Super-Strong Fix & Seal
Aqua Forte Super-Strong Fix & Seal (BLACK)
Our Go to #KoiWindow sealant 290ml gun tube
Super-strong Fix & Seal is a high quality permanent elastic glue & sealer.
This product has the unique ability to seal different materials to each other & replaces/combines the qualities of all standard glues & sealers (i.e. silicone, acryl, butyl, etc.)
Use for sealing or connecting:
- Flanges
- TPRs
- GPRs
- Waterfall lips
- Skimmer faceplates
- Bottom drainsFix & Seal is 100% fish safe & UV resistant. End result can be painted.
Griffon WDF-05 250ml (fast dry)
£9.90
£10.50
Griffon WDF-05 250ml (fast dry)
Solvent cement for joining PVC and ABS (flexible) tubes, coupling sleeves and fittings in pressure and drainage up to diameter 160
mm. Maximum pressure 16 bar for PVC (PN16) and 5 bar for ABS (PN5).
- Suitable for Wet and Dry Conditions (not under water)
- Extremely fast drying. For PVC and ABS
- Gap filling (max. 0,8mm)
- For Flexible tubes (hoses) and Swimming Pool Installations
- Brush included. According to European standard EN 14814
Seneye POND PACK V2
£319.90
£339.99
Seneye POND PACK V2
Everything you need to get monitoring your pond through the internet.
contents include
- seneye pond
- seneye web server WiFi
- seneye Dri
monitor the invisible killers in your koi Pond
The highly accurate disposable seneye slide ensures there is no calibration of the device needed, simply replace each month for accurate and reliable readings.
Your replacement slide allows for the monitoring of free ammonia and pH. The free ammonia (NH3) sensor allows for detection of this highly toxic chemical at very low levels. The pH sensor allows for monitoring of your aquarium or pond water between 6.4 and 9. This range is ideal for most aquatic life and by monitoring this range increased accuracy has be achieved.
Early warning, intelligent software predicts future water conditions
The intelligent software in the seneye system monitors all the readings as they are delivered and using our sophisticated algorithm your levels will be predicted based on your previous readings, type of environment and the volume of water.
graphing you can see around the world
With the seneye+ your data is automatically graphed for you allowing you to instantly see any developing trends. You can access results from your seneye.me account worldwide, the reasons are stored online for easy viewing.
Convenient alerts sent to e-mail and mobile phone
Automatic alerts when your levels increase or decrease can be sent to your e-mail address or optionally to your mobile phone via SMS* messages. (SMS alerts may not be available in all countries)
Soak slide for 24 hours
Remember to always soak your seneye slide for a minimum for 24 hours before using it. Take a glass of water from your pond and place the slide in. Soaking allows the sensor pad time to stabilise so accurate readings can be taken.
Seneye Slide Pack (3 x pcs)
£22.95
£23.95
Seneye Slide Pack (3 x pcs)
This pack includes three slides totalling 3 months seneye+ e-mail alerts, automatic online graphing, and personalised advice. Activating your seneye+ is really easy and the disposable slide removes the need for recalibration (and the cost of recalibration fluids/buffers etc…) and better still it improves accuracy.
* always store your seneye+ slides in a cool dry dark place.
6"- 4" Reducer Flexible Rubber
£32.90
£34.95
6"- 4" Reducer
Flexible Rubber fitting with jubilee clips.
6"- 4" Reducer
4"- 3" Reducer Flexible Rubber
£12.90
£13.50
4"- 3" Reducer
Flexible Rubber fitting with jubilee clips.
6"- 4" Reducer
4"- 2" Reducer Flexible Rubber
£14.90
£15.50
4"- 2" Reducer
Flexible Rubber fitting with jubilee clips.
4"- 1.5" Reducer Flexible Rubber
£14.90
£15.50
4"- 1.5" Reducer
Flexible Rubber fitting with jubilee clips.
4" Elbow Flexible Rubber
£18.20
£19.50
4" Elbow
Flexible Rubber fitting with jubilee clips.
4" T-Piece Flexible Rubber
£22.00
£23.50
4" T-Piece
Flexible Rubber fitting with jubilee clips.
4" Coupler Flexible Rubber
£13.90
£14.50
4" Coupler
Flexible Rubber fitting with jubilee clips.
4" End Cap Flexible Rubber
£4.95
£9.50
4" End Cap
Flexible Rubber fitting with jubilee clips.
3" - 2" Reducer Flexible Rubber
£10.00
£10.50
3" - 2" Reducer
Flexible Rubber fitting with jubilee clips.
3" Elbow Flexible Rubber
£12.70
£13.00
3" Elbow
Flexible Rubber fitting with jubilee clips.
3" T-Piece Flexible Rubber
£18.90
£19.50
3" T-Piece
Flexible Rubber fitting with jubilee clips.
3" Coupler Flexible Rubber
£10.50
£11.00
3" Coupler
Flexible Rubber fitting with jubilee clips.
3" End Cap Flexible Rubber
£7.50
£7.80
3" End Cap
Flexible Rubber fitting with jubilee clips.
2" - 1.5" Reducer Flexible Rubber
£7.20
£7.60
2" - 1.5" Reducer
Flexible Rubber fitting with jubilee clips.
2" Elbow Flexible Rubber
£7.90
£8.50
2" Elbow
Flexible Rubber fitting with jubilee clips.
2" T-Piece Flexible Rubber
£10.50
£11.00
2" T-Piece
Flexible Rubber fitting with jubilee clips.
2" Coupler Flexible Rubber
£7.50
£7.90
2" Coupler
Flexible Rubber fitting with jubilee clips.
2" End Cap Flexible Rubber
£6.50
£6.90
2" End Cap
Flexible Rubber fitting with jubilee clips.
1.5" Elbow Flexible Rubber
£7.10
£7.40
1.5" Elbow
Flexible Rubber fitting with jubilee clips.
1.5" T-Piece Flexible Rubber
£8.90
£9.50
1.5" T-Piece
Flexible Rubber fitting with jubilee clips.
1.5" Coupler Flexible Rubber
£6.00
£6.30
1.5" Coupler
Flexible Rubber fitting with jubilee clips.
1.5" End Cap Flexible Rubber
£5.50
£5.80
1.5" End Cap
Flexible Rubber fitting with jubilee clips.